Menon, Nishanth wrote: > Greetings, > > This patch series introduces support required for OMAP Boards and an example > of OMAP3430 based SDP3430 platform is introduced for U-Boot V2. This series > of patches provide a very basic SRAM boot support. The u-boot.bin file > generated is around 28K in size and may be delivered as part of Peripheral > boot process as described in OMAP3430 TRM[1] page 3728 section 26.4.5. I have > used SRAM for this configuration and heap and stack are in SDRAM in this > example. > > SDP3430 details can be seen in [2]. Please note that there is further work > required for this to be completely useful. Probably requires M18 CFI support, > NAND 16/8 bit support, MMC(and FAT), OneNAND support and USBTTY support to be > fully functional and useful. > > Other platforms that may possibly leverage out of these are: > a) OMAP3430 based Zoom MDK [3] > b) OMAP3530 based beagle board [4] > c) OMAP353x based EVM [5] > d) Pandora [6] > And others that I don't know of :). Please feel free to add.. And ofcourse, > we could move all old OMAPs based platforms across also.. > > I thank Dirk for guiding me on creation of patches, Laurent for pointing out > the dcache issue in my first rev and lots of folks for writing the initial > code.
The complete series (all 17 patches): Acked-by: Dirk Behme <[EMAIL PROTECTED]> Dirk ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
