Avinash Vijayvergia wrote: > Hi there > > I am working on at91sam9260ek. I have put kernel and rfs on dataflash. > Now this board boots up but doesn't enable eth0. I searched net and > found that if I do a ping it enables phy (MD9161A). But if I do that > when there is no network u-boot never recovers. Can someone tell me > the way out. It is successful when network is available, though. What do you mean by 'u-boot never recovers'? It should time out if you try a network operation and are not connected to anything useful.
regards, Ben ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users