Hi All,
I was trying to build u-boot-1.2.0 for atmel (u-boot
source code delivered by the board vendor). Tried
this:
$ make CROSS_COMPILE=arm-linux- sam9l9260_config
$ make CROSS_COMPILE=arm-linux-
but it failed:
make -C tools all
make[1]: Entering directory
`/home/sam9l9260/u-boot-1.2.0-atmel/tools'
make[1]: *** No rule to make target
`/usr/lib/gcc/i686-pc-cygwin/3.4.4/include/stddef.h',
needed by `img2srec.o'. Stop.
make[1]: Leaving directory
`/home/sam9l9260/u-boot-1.2.0-atmel/tools'
make: *** [tools] Error 2
Looks like some header file related to Cygwin (which I
don't need use). I'm cross-compiling on Linux etch.
Tried poking into Makefile but to no avail.
Thanks,
g.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
