On Wed, May 21, 2008 at 11:28:12AM -0500, Menon, Nishanth wrote:
> This patch provides support for loadb and loady and enables the broken
> feature. xyzModem.c is brought in from U-Boot V1, Lindent, checkpatch and
> sparse cleaned :).
>
> Signed-off-by: Nishanth Menon<[EMAIL PROTECTED]>
>
> ---
> commands/Kconfig | 14
> commands/Makefile | 1
> commands/loadb.c | 182 ++++++++---
> commands/xyzModem.c | 792
> ++++++++++++++++++++++++++++++++++++++++++++++++++++
> lib/Makefile | 1
> 5 files changed, 932 insertions(+), 58 deletions(-)
>
> Index: u-boot-v2.git/commands/Kconfig
> ===================================================================
> --- u-boot-v2.git.orig/commands/Kconfig 2008-05-20 17:53:55.000000000
> -0500
> +++ u-boot-v2.git/commands/Kconfig 2008-05-20 17:54:18.000000000 -0500
> @@ -121,13 +121,23 @@
> endmenu
>
> menu "memory "
> +config LOAD_ADDR
> + depends on CMD_LOADB
> + hex
> + prompt "default load address"
> + help
> + Provide the default load address for the platform
>
> config CMD_LOADB
> - depends on BROKEN
> select CRC16
> - tristate
> + bool
> prompt "loadb"
Is there a reason why loadb does not work as module? othwerwise you
should leave this to tristate.
>
> +config CMD_LOADY
> + select CRC16
> + bool
> + prompt "loady"
> +
> config CMD_LOADS
> depends on BROKEN
> tristate
> Index: u-boot-v2.git/commands/Makefile
> ===================================================================
> --- u-boot-v2.git.orig/commands/Makefile 2008-05-20 17:53:55.000000000
> -0500
> +++ u-boot-v2.git/commands/Makefile 2008-05-20 17:54:18.000000000 -0500
> @@ -1,5 +1,6 @@
> obj-$(CONFIG_CMD_BOOTM) += bootm.o
> obj-$(CONFIG_CMD_LOADB) += loadb.o xyzModem.o
> +obj-$(CONFIG_CMD_LOADY) += loadb.o xyzModem.o
> obj-$(CONFIG_CMD_LOADS) += loads.o
> obj-$(CONFIG_CMD_ECHO) += echo.o
> obj-$(CONFIG_CMD_MEMORY) += mem.o
> Index: u-boot-v2.git/commands/loadb.c
> ===================================================================
> --- u-boot-v2.git.orig/commands/loadb.c 2008-05-20 17:53:55.000000000
> -0500
> +++ u-boot-v2.git/commands/loadb.c 2008-05-20 17:58:05.000000000 -0500
> @@ -1,3 +1,12 @@
> +/**
> + * @file
> + * @brief LoadB and LoadY support.
> + *
> + * Provides loadb (over Kermit) and LoadY(over Y modem) support to download
> + * images.
> + *
> + * FileName: commands/loadb.c
> + */
> /*
> * (C) Copyright 2000-2004
> * Wolfgang Denk, DENX Software Engineering, [EMAIL PROTECTED]
> @@ -26,14 +35,16 @@
> */
> #include <common.h>
> #include <command.h>
> -#include <s_record.h>
> -#include <net.h>
> -#include <exports.h>
> #include <xyzModem.h>
> +#include <console.h>
> +#include <errno.h>
> +#include <environment.h>
> +#include <cache.h>
>
> -DECLARE_GLOBAL_DATA_PTR;
>
> +#ifdef CONFIG_CMD_LOADY
> static ulong load_serial_ymodem (ulong offset);
> +#endif
>
> #define XON_CHAR 17
> #define XOFF_CHAR 19
> @@ -50,36 +61,70 @@
> #define tochar(x) ((char) (((x) + SPACE) & 0xff))
> #define untochar(x) ((int) (((x) - SPACE) & 0xff))
>
> -extern int os_data_count;
> -extern int os_data_header[8];
>
> static void set_kerm_bin_mode(unsigned long *);
> static int k_recv(void);
> static ulong load_serial_bin (ulong offset);
>
>
> -char his_eol; /* character he needs at end of packet */
> -int his_pad_count; /* number of pad chars he needs */
> -char his_pad_char; /* pad chars he needs */
> -char his_quote; /* quote chars he'll use */
> +static char his_eol; /* character he needs at end of packet */
> +static int his_pad_count; /* number of pad chars he needs */
> +static char his_pad_char; /* pad chars he needs */
> +static char his_quote; /* quote chars he'll use */
> +
>
> -int do_load_serial_bin (cmd_tbl_t *cmdtp, int argc, char *argv[])
> +/**
> + * @brief returns current used console device
> + *
> + * @return console device which is registered with CONSOLE_STDIN and
> + * CONSOLE_STDOUT
> + */
> +static struct console_device *get_current_console(void)
> +{
> + struct console_device *cdev;
> + /*
> + * Assumption to have BOTH CONSOLE_STDIN AND STDOUT in the
> + * same output console
> + */
> + for_each_console(cdev) {
> + if ((cdev->f_active & (CONSOLE_STDIN | CONSOLE_STDOUT)))
> + return cdev;
> + }
> + return NULL;
> +}
> +
> +/**
> + * @brief provide the loadb(Kermit) or loadY mode support
> + *
> + * @param cmdtp
> + * @param argc
> + * @param argv
> + *
> + * @return success or failure
> + */
> +static int do_load_serial_bin(cmd_tbl_t *cmdtp, int argc, char *argv[])
> {
> ulong offset = 0;
> ulong addr;
> int load_baudrate, current_baudrate;
> int rcode = 0;
> char *s;
> + struct console_device *cdev = get_current_console();
> + if (NULL == cdev) {
> + printf("No device with STDIN and STDOUT\n");
> + return -ENODEV;
> + }
>
> - /* pre-set offset from CFG_LOAD_ADDR */
> - offset = CFG_LOAD_ADDR;
> + /* pre-set offset from CONFIG_LOAD_ADDR */
> + offset = CONFIG_LOAD_ADDR;
>
> /* pre-set offset from $loadaddr */
> - if ((s = getenv("loadaddr")) != NULL) {
> + s = (char *) getenv("loadaddr");
> + if (s != NULL)
> offset = simple_strtoul(s, NULL, 16);
Parameters to commands should go via command line arguments and not
environment variables. The use of environment variables makes it
necessary to read the documentation (if it's there ;) or the source to
make it clear which commands use which variables. Command line options
on the other hand are self explaining via the -h option.
Normally commands like tftp work on a file and not on a plain memory
address. The serial commands should behave the same.
> - }
>
> - load_baudrate = current_baudrate = gd->baudrate;
> + load_baudrate = current_baudrate =
> + simple_strtoul(cdev->baudrate_string, NULL, 10);
>
> if (argc >= 2) {
> offset = simple_strtoul(argv[1], NULL, 16);
> @@ -96,15 +141,14 @@
> printf ("## Switch baudrate to %d bps and press ENTER ...\n",
> load_baudrate);
> udelay(50000);
> - gd->baudrate = load_baudrate;
> - serial_setbrg ();
> + cdev->setbrg(cdev, load_baudrate);
> udelay(50000);
> for (;;) {
> if (getc() == '\r')
> break;
> }
> }
> -
> +#ifdef CONFIG_CMD_LOADY
> if (strcmp(argv[0],"loady")==0) {
> printf ("## Ready for binary (ymodem) download "
> "to 0x%08lX at %d bps...\n",
> @@ -113,7 +157,10 @@
>
> addr = load_serial_ymodem (offset);
>
> - } else {
> + }
> +#endif
> +#ifdef CONFIG_CMD_LOADB
> + if (strcmp(argv[0],"loadb")==0) {
>
> printf ("## Ready for binary (kermit) download "
> "to 0x%08lX at %d bps...\n",
> @@ -122,20 +169,18 @@
> addr = load_serial_bin (offset);
>
> if (addr == ~0) {
> - load_addr = 0;
> printf ("## Binary (kermit) download aborted\n");
> rcode = 1;
> } else {
> printf ("## Start Addr = 0x%08lX\n", addr);
> - load_addr = addr;
> }
> }
> +#endif
> if (load_baudrate != current_baudrate) {
> printf ("## Switch baudrate to %d bps and press ESC ...\n",
> current_baudrate);
> udelay (50000);
> - gd->baudrate = current_baudrate;
> - serial_setbrg ();
> + cdev->setbrg(cdev, current_baudrate);
> udelay (50000);
> for (;;) {
> if (getc() == 0x1B) /* ESC */
> @@ -147,6 +192,14 @@
> }
>
>
> +#ifdef CONFIG_CMD_LOADB
> +/**
> + * @brief loadb Support over kermit protocol
> + *
> + * @param offset where to download to
> + *
> + * @return downloaded address
> + */
> static ulong load_serial_bin (ulong offset)
> {
> int size, i;
> @@ -175,17 +228,18 @@
>
> return offset;
> }
> +#endif
>
> -void send_pad (void)
> +static void send_pad (void)
> {
> int count = his_pad_count;
>
> while (count-- > 0)
> - putc (his_pad_char);
> + console_putc (CONSOLE_STDOUT, his_pad_char);
> }
>
> /* converts escaped kermit char to binary char */
> -char ktrans (char in)
> +static char ktrans(char in)
> {
> if ((in & 0x60) == 0x40) {
> return (char) (in & ~0x40);
> @@ -195,7 +249,7 @@
> return in;
> }
>
> -int chk1 (char *buffer)
> +static int chk1 (char *buffer)
> {
> int total = 0;
>
> @@ -205,16 +259,16 @@
> return (int) ((total + ((total >> 6) & 0x03)) & 0x3f);
> }
>
> -void s1_sendpacket (char *packet)
> +static void s1_sendpacket (char *packet)
> {
> send_pad ();
> while (*packet) {
> - putc (*packet++);
> + console_putc (CONSOLE_STDOUT, *packet++);
> }
> }
>
> static char a_b[24];
> -void send_ack (int n)
> +static void send_ack (int n)
> {
> a_b[0] = START_CHAR;
> a_b[1] = tochar (3);
> @@ -227,7 +281,7 @@
> s1_sendpacket (a_b);
> }
>
> -void send_nack (int n)
> +static void send_nack (int n)
> {
> a_b[0] = START_CHAR;
> a_b[1] = tochar (3);
> @@ -246,14 +300,15 @@
>
> if image is binary, no header is stored in os_data_header.
> */
> -void (*os_data_init) (void);
> -void (*os_data_char) (char new_char);
> +static void (*os_data_init) (void);
> +static void (*os_data_char) (char new_char);
> static int os_data_state, os_data_state_saved;
> -int os_data_count;
> +static int os_data_count;
> static int os_data_count_saved;
> static char *os_data_addr, *os_data_addr_saved;
> static char *bin_start_address;
> -int os_data_header[8];
> +/* FIXME: carry over feature to use this. commented for sparse warning
> +static int os_data_header[8]; */
> static void bin_data_init (void)
> {
> os_data_state = 0;
> @@ -291,22 +346,22 @@
>
> /* k_data_* simply handles the kermit escape translations */
> static int k_data_escape, k_data_escape_saved;
> -void k_data_init (void)
> +static void k_data_init(void)
> {
> k_data_escape = 0;
> os_data_init ();
> }
> -void k_data_save (void)
> +static void k_data_save(void)
> {
> k_data_escape_saved = k_data_escape;
> os_data_save ();
> }
> -void k_data_restore (void)
> +static void k_data_restore(void)
> {
> k_data_escape = k_data_escape_saved;
> os_data_restore ();
> }
> -void k_data_char (char new_char)
> +static void k_data_char(char new_char)
> {
> if (k_data_escape) {
> /* last char was escape - translate this character */
> @@ -324,12 +379,12 @@
> }
>
> #define SEND_DATA_SIZE 20
> -char send_parms[SEND_DATA_SIZE];
> -char *send_ptr;
> +static char send_parms[SEND_DATA_SIZE];
> +static char *send_ptr;
>
> /* handle_send_packet interprits the protocol info and builds and
> sends an appropriate ack for what we can do */
> -void handle_send_packet (int n)
> +static void handle_send_packet(int n)
> {
> int length = 3;
> int bytes;
> @@ -588,11 +643,19 @@
> return ((ulong) os_data_addr - (ulong) bin_start_address);
> }
>
> +#ifdef CONFIG_CMD_LOADY
> static int getcxmodem(void) {
> if (tstc())
> return (getc());
> return -1;
> }
> +/**
> + * @brief LoadY over ymodem protocol
> + *
> + * @param offset address to download to
> + *
> + * @return address downloaded
> + */
> static ulong load_serial_ymodem (ulong offset)
> {
> int size;
> @@ -633,19 +696,26 @@
>
> return offset;
> }
> +#endif
>
> -U_BOOT_CMD(
> - loadb, 3, 0, do_load_serial_bin,
> - "loadb - load binary file over serial line (kermit mode)\n",
> - "[ off ] [ baud ]\n"
> - " - load binary file over serial line"
> - " with offset 'off' and baudrate 'baud'\n"
> -);
> -
> -U_BOOT_CMD(
> - loady, 3, 0, do_load_serial_bin,
> - "loady - load binary file over serial line (ymodem mode)\n",
> +static const __maybe_unused char cmd_loadb_help[] =
> "[ off ] [ baud ]\n"
> " - load binary file over serial line"
> - " with offset 'off' and baudrate 'baud'\n"
> -);
> + " with offset 'off' and baudrate 'baud'\n";
> +#ifdef CONFIG_CMD_LOADB
> +U_BOOT_CMD_START(loadb)
> + .maxargs = 3,
> + .cmd = do_load_serial_bin,
> + .usage = "load binary file over serial line (kermit mode)",
> + U_BOOT_CMD_HELP(cmd_loadb_help)
> +U_BOOT_CMD_END
> +#endif
> +
> +#ifdef CONFIG_CMD_LOADY
> +U_BOOT_CMD_START(loady)
> + .maxargs = 3,
> + .cmd = do_load_serial_bin,
> + .usage = "load binary file over serial line (ymodem mode)",
> + U_BOOT_CMD_HELP(cmd_loadb_help)
> +U_BOOT_CMD_END
> +#endif
> Index: u-boot-v2.git/commands/xyzModem.c
> ===================================================================
> --- /dev/null 1970-01-01 00:00:00.000000000 +0000
> +++ u-boot-v2.git/commands/xyzModem.c 2008-05-20 17:54:18.000000000 -0500
> @@ -0,0 +1,792 @@
> +/**
> + * @file
> + * @brief RedBoot stream handler for xyzModem protocol
> + *
> + * FileName: commands/xyzModem.c
> + * Originally from U-Boot V1 xyzModem.c
> + */
> +/*
> + * 2008 - Nishanth Menon <[EMAIL PROTECTED]>
> + * Modified for sparse and checkpatch.pl compliance
> + */
> +/*
> + *==========================================================================
> + *
> + * xyzModem.c
> + *
> + * RedBoot stream handler for xyzModem protocol
> + *
> + *==========================================================================
> + *####ECOSGPLCOPYRIGHTBEGIN####
> + * -------------------------------------------
> + * This file is part of eCos, the Embedded Configurable Operating System.
> + * Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
> + * Copyright (C) 2002 Gary Thomas
> + *
> + * eCos is free software; you can redistribute it and/or modify it under
> + * the terms of the GNU General Public License as published by the Free
> + * Software Foundation; either version 2 or (at your option) any later
> version.
> + *
> + * eCos is distributed in the hope that it will be useful, but WITHOUT ANY
> + * WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> + * for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with eCos; if not, write to the Free Software Foundation, Inc.,
> + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
> + *
> + * As a special exception, if other files instantiate templates or use macros
> + * or inline functions from this file, or you compile this file and link it
> + * with other works to produce a work based on this file, this file does not
> + * by itself cause the resulting work to be covered by the GNU General Public
> + * License. However the source code for this file must still be made
> available
> + * in accordance with section (3) of the GNU General Public License.
> + *
> + * This exception does not invalidate any other reasons why a work based on
> + * this file might be covered by the GNU General Public License.
> + *
> + * Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
> + * at http: *sources.redhat.com/ecos/ecos-license/
> + * -------------------------------------------
> + *####ECOSGPLCOPYRIGHTEND####
> + *==========================================================================
> + *#####DESCRIPTIONBEGIN####
> + *
> + * Author(s): gthomas
> + * Contributors: gthomas, tsmith, Yoshinori Sato
> + * Date: 2000-07-14
> + * Purpose:
> + * Description:
> + *
> + * This code is part of RedBoot (tm).
> + *
> + *####DESCRIPTIONEND####
> + *
> + *==========================================================================
> + */
> +#include <common.h>
> +#include <xyzModem.h>
> +#include <stdarg.h>
> +#include <stdio.h>
> +#include <console.h>
> +#include <crc.h>
> +
> +/* Assumption - run xyzModem protocol over the console port */
> +
> +/* Values magic to the protocol */
> +#define SOH 0x01
> +#define STX 0x02
> +#define EOT 0x04
> +#define ACK 0x06
> +#define BSP 0x08
> +#define NAK 0x15
> +#define CAN 0x18
> +#define EOF 0x1A /* ^Z for DOS officionados */
> +
> +#define USE_YMODEM_LENGTH
> +
> +/* Data & state local to the protocol */
> +static struct {
> +#ifdef REDBOOT
> + hal_virtual_comm_table_t *__chan;
> +#else
> + int *__chan;
> +#endif
> + unsigned char pkt[1024], *bufp;
> + unsigned char blk, cblk, crc1, crc2;
> + unsigned char next_blk; /* Expected block */
> + int len, mode, total_retries;
> + int total_SOH, total_STX, total_CAN;
> + bool crc_mode, at_eof, tx_ack;
> +#ifdef USE_YMODEM_LENGTH
> + unsigned long file_length, read_length;
> +#endif
> +} xyz;
> +
> +#define xyzModem_CHAR_TIMEOUT 2000 /* 2 seconds */
> +#define xyzModem_MAX_RETRIES 20
> +#define xyzModem_MAX_RETRIES_WITH_CRC 10
> +/* Wait for 3 CAN before quitting */
> +#define xyzModem_CAN_COUNT 3
> +
> +#ifndef REDBOOT /*SB */
> +typedef int cyg_int32;
> +static int CYGACC_COMM_IF_GETC_TIMEOUT(char chan, char *c)
> +{
> +#define DELAY 20
> + unsigned long counter = 0;
> + while (!tstc() && (counter < xyzModem_CHAR_TIMEOUT * 1000 / DELAY)) {
> + udelay(DELAY);
> + counter++;
> + }
> + if (tstc()) {
> + *c = getc();
> + return 1;
> + }
> + return 0;
> +}
> +
> +static void CYGACC_COMM_IF_PUTC(char x, char y)
> +{
> + console_putc(CONSOLE_STDOUT, y);
> +}
> +
> +/* Validate a hex character */
> +static inline bool _is_hex(char c)
> +{
> + return (((c >= '0') && (c <= '9')) ||
> + ((c >= 'A') && (c <= 'F')) || ((c >= 'a') && (c <= 'f')));
> +}
> +
> +/* Convert a single hex nibble */
> +static inline int _from_hex(char c)
> +{
> + int ret = 0;
> +
> + if ((c >= '0') && (c <= '9'))
> + ret = (c - '0');
> + else if ((c >= 'a') && (c <= 'f'))
> + ret = (c - 'a' + 0x0a);
> + else if ((c >= 'A') && (c <= 'F'))
> + ret = (c - 'A' + 0x0A);
> +
> + return ret;
> +}
> +
> +/* Convert a character to lower case */
> +static inline char _tolower(char c)
> +{
> + if ((c >= 'A') && (c <= 'Z'))
> + c = (c - 'A') + 'a';
> + return c;
> +}
We already have a tolower function in include/linux/ctype.h
> +
> +/* Parse (scan) a number */
> +static bool parse_num(char *s, unsigned long *val, char **es, char *delim)
> +{
> + bool first = true;
> + int radix = 10;
> + char c;
> + unsigned long result = 0;
> + int digit;
> +
> + while (*s == ' ')
> + s++;
> + while (*s) {
> + if (first && (s[0] == '0') && (_tolower(s[1]) == 'x')) {
> + radix = 16;
> + s += 2;
> + }
> + first = false;
> + c = *s++;
> + if (_is_hex(c))
> + digit = _from_hex(c);
> + if (_is_hex(c) && (digit < radix)) {
> + /* Valid digit */
> +#ifdef CYGPKG_HAL_MIPS
> + /* FIXME: tx49 compiler generates 0x2539018 for
> + * MUL which isn't any good. */
> + if (16 == radix)
> + result = result << 4;
> + else
> + result = 10 * result;
> + result += digit;
> +#else
> + result = (result * radix) + digit;
> +#endif
> + } else {
> + if (delim != (char *)0) {
> + /* See if this character is one of the
> + * delimiters */
> + char *dp = delim;
> + while (*dp && (c != *dp))
> + dp++;
> + if (*dp)
> + break; /* Found a good delimiter */
> + }
> + return false; /* Malformatted number */
> + }
> + }
> + *val = result;
> + if (es != (char **)0)
> + *es = s;
> + return true;
> +}
> +
> +#endif
> +
> +#define USE_SPRINTF
> +#ifdef DEBUG
> +#ifndef USE_SPRINTF
> +/*
> + * Note: this debug setup only works if the target platform has two serial
> ports
> + * available so that the other one (currently only port 1) can be used for
> debug
> + * messages.
> + */
> +static int zm_dprintf(char *fmt, ...)
> +{
> + int cur_console;
> + va_list args;
> +
> + va_start(args, fmt);
> +#ifdef REDBOOT
> + cur_console =
> + CYGACC_CALL_IF_SET_CONSOLE_COMM
> + (CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
> + CYGACC_CALL_IF_SET_CONSOLE_COMM(1);
> +#endif
> + diag_vprintf(fmt, args);
> +#ifdef REDBOOT
> + CYGACC_CALL_IF_SET_CONSOLE_COMM(cur_console);
> +#endif
> +}
> +
> +static void zm_flush(void)
> +{
> +}
> +
> +#else
> +/*
> + * Note: this debug setup works by storing the strings in a fixed buffer
> + */
> +#define FINAL
> +#ifdef FINAL
> +static char *zm_out = (char *)0x00380000;
> +static char *zm_out_start = (char *)0x00380000;
> +#else
> +static char zm_buf[8192];
> +static char *zm_out = zm_buf;
> +static char *zm_out_start = zm_buf;
> +
> +#endif
> +static int zm_dprintf(char *fmt, ...)
> +{
> + int len;
> + va_list args;
> +
> + va_start(args, fmt);
> + len = diag_vsprintf(zm_out, fmt, args);
> + zm_out += len;
> + return len;
> +}
> +
> +static void zm_flush(void)
> +{
> +#ifdef REDBOOT
> + char *p = zm_out_start;
> + while (*p)
> + mon_write_char(*p++);
> +#endif
> + zm_out = zm_out_start;
> +}
> +#endif
> +
> +static void zm_dump_buf(void *buf, int len)
> +{
> +#ifdef REDBOOT
> + diag_vdump_buf_with_offset(zm_dprintf, buf, len, 0);
> +#else
> +
> +#endif
> +}
> +
> +static unsigned char zm_buf[2048];
> +static unsigned char *zm_bp;
> +
> +static void zm_new(void)
> +{
> + zm_bp = zm_buf;
> +}
> +
> +static void zm_save(unsigned char c)
> +{
> + *zm_bp++ = c;
> +}
> +
> +static void zm_dump(int line)
> +{
> + zm_dprintf("Packet at line: %d\n", line);
> + zm_dump_buf(zm_buf, zm_bp - zm_buf);
> +}
> +
> +#define ZM_DEBUG(x) x
> +#else
> +#define ZM_DEBUG(x)
> +#endif
> +
> +/* Wait for the line to go idle */
> +static void xyzModem_flush(void)
> +{
> + int res;
> + char c;
> + while (true) {
> + res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
> + if (!res)
> + return;
> + }
> +}
> +
> +static int xyzModem_get_hdr(void)
> +{
> + char c;
> + int res;
> + bool hdr_found = false;
> + int i, can_total, hdr_chars;
> + unsigned short cksum;
> +
> + ZM_DEBUG(zm_new());
> + /* Find the start of a header */
> + can_total = 0;
> + hdr_chars = 0;
> +
> + if (xyz.tx_ack) {
> + CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
> + xyz.tx_ack = false;
> + }
> + while (!hdr_found) {
> + res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
> + ZM_DEBUG(zm_save(c));
> + if (res) {
> + hdr_chars++;
> + switch (c) {
> + case SOH:
> + xyz.total_SOH++;
> + case STX:
> + if (c == STX)
> + xyz.total_STX++;
> + hdr_found = true;
> + break;
> + case CAN:
> + xyz.total_CAN++;
> + ZM_DEBUG(zm_dump(__LINE__));
> + if (++can_total == xyzModem_CAN_COUNT) {
> + return xyzModem_cancel;
> + } else {
> + /* Wait for multiple CAN to avoid
> + * early quits */
> + break;
> + }
> + case EOT:
> + /* EOT only supported if no noise */
> + if (hdr_chars == 1) {
> + CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
> + ZM_DEBUG(zm_dprintf
> + ("ACK on EOT #%d\n",
> + __LINE__));
> + ZM_DEBUG(zm_dump(__LINE__));
> + return xyzModem_eof;
> + }
> + default:
> + /* Ignore, waiting for start of header */
> + ;
> + }
> + } else {
> + /* Data stream timed out */
> + xyzModem_flush(); /* Toss any current input */
> + ZM_DEBUG(zm_dump(__LINE__));
> + CYGACC_CALL_IF_DELAY_US((cyg_int32) 250000);
> + return xyzModem_timeout;
> + }
> + }
> +
> + /* Header found, now read the data */
> + res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.blk);
> + ZM_DEBUG(zm_save(xyz.blk));
> + if (!res) {
> + ZM_DEBUG(zm_dump(__LINE__));
> + return xyzModem_timeout;
> + }
> + res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.cblk);
> + ZM_DEBUG(zm_save(xyz.cblk));
> + if (!res) {
> + ZM_DEBUG(zm_dump(__LINE__));
> + return xyzModem_timeout;
> + }
> + xyz.len = (c == SOH) ? 128 : 1024;
> + xyz.bufp = xyz.pkt;
> + for (i = 0; i < xyz.len; i++) {
> + res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
> + ZM_DEBUG(zm_save(c));
> + if (res) {
> + xyz.pkt[i] = c;
> + } else {
> + ZM_DEBUG(zm_dump(__LINE__));
> + return xyzModem_timeout;
> + }
> + }
> + res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.crc1);
> + ZM_DEBUG(zm_save(xyz.crc1));
> + if (!res) {
> + ZM_DEBUG(zm_dump(__LINE__));
> + return xyzModem_timeout;
> + }
> + if (xyz.crc_mode) {
> + res =
> + CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.crc2);
> + ZM_DEBUG(zm_save(xyz.crc2));
> + if (!res) {
> + ZM_DEBUG(zm_dump(__LINE__));
> + return xyzModem_timeout;
> + }
> + }
> + ZM_DEBUG(zm_dump(__LINE__));
> + /* Validate the message */
> + if ((xyz.blk ^ xyz.cblk) != (unsigned char)0xFF) {
> + ZM_DEBUG(zm_dprintf
> + ("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk,
> + (xyz.blk ^ xyz.cblk)));
> + ZM_DEBUG(zm_dump_buf(xyz.pkt, xyz.len));
> + xyzModem_flush();
> + return xyzModem_frame;
> + }
> + /* Verify checksum/CRC */
> + if (xyz.crc_mode) {
> + cksum = cyg_crc16(xyz.pkt, xyz.len);
> + if (cksum != ((xyz.crc1 << 8) | xyz.crc2)) {
> + ZM_DEBUG(zm_dprintf
> + ("CRC error - recvd: %02x%02x, computed: %x\n",
> + xyz.crc1, xyz.crc2, cksum & 0xFFFF));
> + return xyzModem_cksum;
> + }
> + } else {
> + cksum = 0;
> + for (i = 0; i < xyz.len; i++)
> + cksum += xyz.pkt[i];
> + if (xyz.crc1 != (cksum & 0xFF)) {
> + ZM_DEBUG(zm_dprintf
> + ("Checksum error - recvd: %x, computed: %x\n",
> + xyz.crc1, cksum & 0xFF));
> + return xyzModem_cksum;
> + }
> + }
> + /* If we get here, the message passes [structural] muster */
> + return 0;
> +}
> +
> +int xyzModem_stream_open(connection_info_t *info, int *err)
> +{
> +#ifdef REDBOOT
> + int console_chan;
> +#endif
> + int stat = 0;
> + int retries = xyzModem_MAX_RETRIES;
> + int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC;
> +
> +/* ZM_DEBUG(zm_out = zm_out_start); */
> +#ifdef xyzModem_zmodem
> + if (info->mode == xyzModem_zmodem) {
> + *err = xyzModem_noZmodem;
> + return -1;
> + }
> +#endif
> +
> +#ifdef REDBOOT
> + /* Set up the I/O channel. Note: this allows for using a different
> + * port in the future */
> + console_chan =
> + CYGACC_CALL_IF_SET_CONSOLE_COMM
> + (CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
> + if (info->chan >= 0)
> + CYGACC_CALL_IF_SET_CONSOLE_COMM(info->chan);
> + else
> + CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
> +
> + xyz.__chan = CYGACC_CALL_IF_CONSOLE_PROCS();
> +
> + CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
> + CYGACC_COMM_IF_CONTROL(*xyz.__chan, __COMMCTL_SET_TIMEOUT,
> + xyzModem_CHAR_TIMEOUT);
> +#else
> +/* TODO: CHECK ! */
> + int dummy;
> + xyz.__chan = &dummy;
> +#endif
> + xyz.len = 0;
> + xyz.crc_mode = true;
> + xyz.at_eof = false;
> + xyz.tx_ack = false;
> + xyz.mode = info->mode;
> + xyz.total_retries = 0;
> + xyz.total_SOH = 0;
> + xyz.total_STX = 0;
> + xyz.total_CAN = 0;
> +#ifdef USE_YMODEM_LENGTH
> + xyz.read_length = 0;
> + xyz.file_length = 0;
> +#endif
> +
> + CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
> +
> + if (xyz.mode == xyzModem_xmodem) {
> + /* X-modem doesn't have an information header - exit here */
> + xyz.next_blk = 1;
> + return 0;
> + }
> +
> + while (retries-- > 0) {
> + stat = xyzModem_get_hdr();
> + if (stat == 0) {
> + /* Y-modem file information header */
> + if (xyz.blk == 0) {
> +#ifdef USE_YMODEM_LENGTH
> + /* skip filename */
> + while (*xyz.bufp++) ;
> + /* get the length */
> + parse_num((char *)xyz.bufp, &xyz.file_length,
> + NULL, " ");
> +#endif
> + /* The rest of the file name data block
> + * quietly discarded
> + */
> + xyz.tx_ack = true;
> + }
> + xyz.next_blk = 1;
> + xyz.len = 0;
> + return 0;
> + } else if (stat == xyzModem_timeout) {
> + if (--crc_retries <= 0)
> + xyz.crc_mode = false;
> + /* Extra delay for startup */
> + CYGACC_CALL_IF_DELAY_US(5 * 100000);
> + CYGACC_COMM_IF_PUTC(*xyz.__chan,
> + (xyz.crc_mode ? 'C' : NAK));
> + xyz.total_retries++;
> + ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
> + }
> + if (stat == xyzModem_cancel)
> + break;
> + }
> + *err = stat;
> + ZM_DEBUG(zm_flush());
> + return -1;
> +}
> +
> +int xyzModem_stream_read(char *buf, int size, int *err)
> +{
> + int stat, total, len;
> + int retries;
> +
> + total = 0;
> + stat = xyzModem_cancel;
> + /* Try and get 'size' bytes into the buffer */
> + while (!xyz.at_eof && (size > 0)) {
> + if (xyz.len == 0) {
> + retries = xyzModem_MAX_RETRIES;
> + while (retries-- > 0) {
> + stat = xyzModem_get_hdr();
> + if (stat == 0) {
> + if (xyz.blk == xyz.next_blk) {
> + xyz.tx_ack = true;
> + ZM_DEBUG(zm_dprintf
> + ("ACK block %d (%d)\n",
> + xyz.blk, __LINE__));
> + xyz.next_blk =
> + (xyz.next_blk + 1) & 0xFF;
> +
> +#if defined(xyzModem_zmodem) || defined(USE_YMODEM_LENGTH)
> + if (xyz.mode == xyzModem_xmodem
> + || xyz.file_length == 0) {
> +#else
> + if (1) {
> +#endif
> + /* WARNING - Leaving formatting aside for code
> + * clarity */
> + /* Data blocks can be padded with ^Z (EOF) characters */
> + /* This code tries to detect and remove them */
> + if ((xyz.bufp[xyz.len - 1] == EOF)
> + && (xyz.bufp[xyz.len - 2] == EOF)
> + && (xyz.bufp[xyz.len - 3] == EOF)) {
> + while (xyz.len &&
> + (xyz.bufp[xyz.len - 1] == EOF))
> + xyz.len--;
> + }
> + }
> +#ifdef USE_YMODEM_LENGTH
> + /* WARNING - Leaving formatting aside for code
> + * clarity */
> + /*
> + * See if accumulated length exceeds that of the file.
> + * If so, reduce size (i.e., cut out pad bytes)
> + * Only do this for Y-modem (and Z-modem should it ever
> + * be supported since it can fall back to Y-modem mode).
> + */
> + if (xyz.mode != xyzModem_xmodem
> + && 0 != xyz.file_length) {
> + xyz.read_length += xyz.len;
> + if (xyz.read_length > xyz.file_length)
> + xyz.len -= (xyz.read_length -
> + xyz.file_length);
> + }
> +#endif
> + break;
> + } else if (xyz.blk ==
> + ((xyz.next_blk - 1) &
> + 0xFF)) {
> + /* Just re-ACK this so sender
> + * will get on with it */
> + CYGACC_COMM_IF_PUTC(*xyz.__chan,
> + ACK);
> + /* Need new header */
> + continue;
> + } else
> + stat = xyzModem_sequence;
> + }
> + if (stat == xyzModem_cancel)
> + break;
> + if (stat == xyzModem_eof) {
> + CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
> + ZM_DEBUG(zm_dprintf
> + ("ACK (%d)\n", __LINE__));
> + if (xyz.mode == xyzModem_ymodem) {
> + CYGACC_COMM_IF_PUTC(*xyz.__chan,
> + (xyz.
> + crc_mode ?
> + 'C' :
> + NAK));
> + xyz.total_retries++;
> + ZM_DEBUG(zm_dprintf
> + ("Reading Final Header\n"));
> + stat = xyzModem_get_hdr();
> + CYGACC_COMM_IF_PUTC(*xyz.__chan,
> + ACK);
> + ZM_DEBUG(zm_dprintf
> + ("FINAL ACK (%d)\n",
> + __LINE__));
> + }
> + xyz.at_eof = true;
> + break;
> + }
> + CYGACC_COMM_IF_PUTC(*xyz.__chan,
> + (xyz.crc_mode ? 'C' : NAK));
> + xyz.total_retries++;
> + ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
> + }
> + if (stat < 0) {
> + *err = stat;
> + xyz.len = -1;
> + return total;
> + }
> + }
> + /* Don't "read" data from the EOF protocol package */
> + if (!xyz.at_eof) {
> + len = xyz.len;
> + if (size < len)
> + len = size;
> + memcpy(buf, xyz.bufp, len);
> + size -= len;
> + buf += len;
> + total += len;
> + xyz.len -= len;
> + xyz.bufp += len;
> + }
> + }
> + return total;
> +}
> +
> +void xyzModem_stream_close(int *err)
> +{
> + diag_printf
> + ("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets,"
> + " %d retries\n",
> + xyz.crc_mode ? "CRC" : "Cksum", xyz.total_SOH, xyz.total_STX,
> + xyz.total_CAN, xyz.total_retries);
> + ZM_DEBUG(zm_flush());
> +}
> +
> +/* Need to be able to clean out the input buffer, so have to take the */
> +/* getc */
> +void xyzModem_stream_terminate(bool abort, int (*getc) (void))
> +{
> + int c;
> +
> + if (abort) {
> + ZM_DEBUG(zm_dprintf("!!!! TRANSFER ABORT !!!!\n"));
> + switch (xyz.mode) {
> + case xyzModem_xmodem:
> + case xyzModem_ymodem:
> + /* The X/YMODEM Spec seems to suggest that multiple CAN
> + * followed by an equal number of Backspaces is a
> + * friendly way to get the other end to abort. */
> + CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN);
> + CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN);
> + CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN);
> + CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN);
> + CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP);
> + CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP);
> + CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP);
> + CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP);
> + /* Now consume the rest of what's waiting on the line.*/
> + ZM_DEBUG(zm_dprintf("Flushing serial line.\n"));
> + xyzModem_flush();
> + xyz.at_eof = true;
> + break;
> +#ifdef xyzModem_zmodem
> + case xyzModem_zmodem:
> + /* Might support it some day I suppose. */
> +#endif
> + break;
> + }
> + } else {
> + ZM_DEBUG(zm_dprintf("Engaging cleanup mode...\n"));
> + /*
> + * Consume any trailing crap left in the inbuffer from
> + * previous recieved blocks. Since very few files are an
> + * exact multiple of the transfer block size, there will
> + * almost always be some gunk here.
> + * If we don't eat it now, RedBoot will think the user typed it.
> + */
> + ZM_DEBUG(zm_dprintf("Trailing gunk:\n"));
> + while ((c = (*getc) ()) > -1) ;
> + ZM_DEBUG(zm_dprintf("\n"));
> + /*
> + * Make a small delay to give terminal programs like minicom
> + * time to get control again after their file transfer program
> + * exits.
> + */
> + CYGACC_CALL_IF_DELAY_US((cyg_int32) 250000);
> + }
> +}
> +
> +char *xyzModem_error(int err)
> +{
> + switch (err) {
> + case xyzModem_access:
> + return "Can't access file";
> + break;
> + case xyzModem_noZmodem:
> + return "Sorry, zModem not available yet";
> + break;
> + case xyzModem_timeout:
> + return "Timed out";
> + break;
> + case xyzModem_eof:
> + return "End of file";
> + break;
> + case xyzModem_cancel:
> + return "Cancelled";
> + break;
> + case xyzModem_frame:
> + return "Invalid framing";
> + break;
> + case xyzModem_cksum:
> + return "CRC/checksum error";
> + break;
> + case xyzModem_sequence:
> + return "Block sequence error";
> + break;
> + default:
> + return "Unknown error";
> + break;
> + }
> +}
> +
> +/*
> + * RedBoot interface
> + */
> +#if 0 /* SB */
> +GETC_IO_FUNCS(xyzModem_io, xyzModem_stream_open, xyzModem_stream_close,
> + xyzModem_stream_terminate, xyzModem_stream_read, xyzModem_error);
> +RedBoot_load(xmodem, xyzModem_io, false, false, xyzModem_xmodem);
> +RedBoot_load(ymodem, xyzModem_io, false, false, xyzModem_ymodem);
> +#endif
> Index: u-boot-v2.git/lib/Makefile
> ===================================================================
> --- u-boot-v2.git.orig/lib/Makefile 2008-05-20 17:53:55.000000000 -0500
> +++ u-boot-v2.git/lib/Makefile 2008-05-20 17:54:18.000000000 -0500
> @@ -19,6 +19,7 @@
> obj-$(CONFIG_BZLIB) += bzlib.o bzlib_crctable.o bzlib_decompress.o
> bzlib_huffman.o bzlib_randtable.o
> obj-$(CONFIG_ZLIB) += zlib.o gunzip.o
> obj-$(CONFIG_CRC32) += crc32.o
> +obj-$(CONFIG_CRC16) += crc16.o
> obj-$(CONFIG_CMDLINE_EDITING) += readline.o
> obj-$(CONFIG_SIMPLE_READLINE) += readline_simple.o
> obj-$(CONFIG_GLOB) += fnmatch.o
>
--
Pengutronix e.K. - Linux Solutions for Science and Industry
-----------------------------------------------------------
Kontakt-Informationen finden Sie im Header dieser Mail oder
auf der Webseite -> http://www.pengutronix.de/impressum/ <-
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
