"Russell McGuire" <[EMAIL PROTECTED]> wrote on 06/03/2008 04:15:55 PM:
> > I haven't gone through the rest yet, but most likely if we want to keep SPD > working for DDR2, we'll have to add the DDR2 definitions SPD into the code, > as it looks like the DDR2 port is only partially complete. > > -Russ > Russ, That's pretty much jives with my recollection. One other thing that leaps to mind was the calculation for max_bus_clk. I hand cranked through that with a high clock rate as input and due to rounding errors got a bogus value. I don't remember the details right off the top of my head but it seems to me that the net result was I started with a bus clock that should have landed max_data_rate in one of those if-if-else-if cases, but it didn't. So I think that whole function (and especially the max_bus_clk calculation) needs to be gone through. Good luck. I'd help but I have my own issues with MTD :(. Bruce ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
