In message <[EMAIL PROTECTED]> you wrote:
> From: Becky Bruce <[EMAIL PROTECTED]>
> 
> Change all code that conditionally operates on high bat
> registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
> instead of the myriad ways this is done now.  Define the option
> for every config for which high bats are supported (and
> enabled by early boot, on parts where they're not always
> enabled)
> 
> Signed-off-by: Becky Bruce <[EMAIL PROTECTED]>
> ---
>  cpu/74xx_7xx/start.S          |    6 +++---
>  cpu/mpc83xx/start.S           |    6 +++---
>  include/configs/Alaska8220.h  |    2 ++
>  include/configs/BC3450.h      |    2 ++
>  include/configs/CPCI750.h     |    2 ++
>  include/configs/IceCube.h     |    2 ++
>  include/configs/MPC8313ERDB.h |    2 ++
>  include/configs/MPC8315ERDB.h |    1 +
>  include/configs/MPC8323ERDB.h |    1 +
>  include/configs/MPC832XEMDS.h |    2 ++
>  include/configs/MPC8349EMDS.h |    1 +
>  include/configs/MPC8349ITX.h  |    1 +
>  include/configs/MPC8360EMDS.h |    2 ++
>  include/configs/MPC8360ERDK.h |    2 ++
>  include/configs/MPC837XEMDS.h |    1 +
>  include/configs/MPC837XERDB.h |    2 ++
>  include/configs/MPC8610HPCD.h |    1 +
>  include/configs/MPC8641HPCN.h |    1 +
>  include/configs/PM520.h       |    2 ++
>  include/configs/TB5200.h      |    2 ++
>  include/configs/TOP5200.h     |    2 ++
>  include/configs/TQM5200.h     |    2 ++
>  include/configs/TQM834x.h     |    2 ++
>  include/configs/Total5200.h   |    2 ++
>  include/configs/Yukon8220.h   |    2 ++
>  include/configs/ads5121.h     |    2 ++
>  include/configs/aev.h         |    2 ++
>  include/configs/canmb.h       |    2 ++
>  include/configs/cm5200.h      |    2 ++
>  include/configs/cpci5200.h    |    2 ++
>  include/configs/hmi1001.h     |    2 ++
>  include/configs/inka4x0.h     |    2 ++
>  include/configs/jupiter.h     |    2 ++
>  include/configs/mcc200.h      |    2 ++
>  include/configs/mecp5200.h    |    2 ++
>  include/configs/motionpro.h   |    1 +
>  include/configs/mpc7448hpc2.h |    2 +-
>  include/configs/munices.h     |    1 +
>  include/configs/o2dnt.h       |    2 ++
>  include/configs/p3mx.h        |    1 +
>  include/configs/pf5200.h      |    1 +
>  include/configs/sbc8349.h     |    2 ++
>  include/configs/smmaco4.h     |    2 ++
>  include/configs/sorcery.h     |    2 ++
>  include/configs/spieval.h     |    2 ++
>  include/configs/uc101.h       |    2 ++
>  include/configs/v38b.h        |    2 ++
>  47 files changed, 84 insertions(+), 7 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
"The greatest warriors are the ones who fight for peace."
- Holly Near

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users

Reply via email to