In message <[EMAIL PROTECTED]> you wrote: > > Brief: we are using U-Boot-1.1.3 on MPC866P processor along with 512 MB > SDRAM on multiple banks.
Should be no problem if done properly. > Problem: > U-Boot is unable to execute the code if it is configured to banks apart > from CS 1. Other way: U-Boot can bring the pheripherals and CLI > interface only with CS 1 (bank 1). This statement is wrong. U-Boot is perfectly able to do this. It is your port of U-Boot which has problems, i. e. the bugs are in the code you added/modified resp. in your configuration. > Analysis: > We could trace the U-Boot code using a BDI debugger and find out that > the U-Boot is able to relocate the code to the SDRAM address and then > call the "blr" intrustion, then system hangs. And you read the FAQ, didn't you? > ------=_NextPart_000_0051_01C8CC75.70EB2E00 > Content-Type: text/html; > charset="iso-8859-1" > Content-Transfer-Encoding: quoted-printable Please never post HTML on this list! Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] Include the success of others in your dreams for your own success. ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
