Andrew,
Thanks for pointing out the problem. The Ethernet unable to transmit
and causes "TX timeout" is due to timer function (udelay) is not working
properly and used an incorrect timer memory mapped. Please append
defined(CONFIG_M5272) after CONFIG_M5253 in
<u-boot>/include/asm-m68k/timer.h. I will provide the patch sometimes
next week.
Regards,
TsiChung
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Monday, June 16, 2008 4:37 PM
To: u-boot-users@lists.sourceforge.net
Subject: [U-Boot-Users] Coldfire 5272C3 Ethernet Support?
Is ethernet support currently working for the Coldfire 5272C3 eval board
off the git repository? Whenever I'm trying to transmit (ping, etc) I'm
getting a "TX timeout" and no packets are making it to the wire. From
what I can tell my receives aren't going much better.
Going back through the archives I found a post from March that seemed to
bring up the same issue but with no visible resolution. If the tip is
broken does anyone know what the last version that was functional on the
5272C3 was?
Thanks,
Andrew Beard
This email and any attachments are only for use by the intended
recipient(s) and may contain legally privileged, confidential,
proprietary or otherwise private information. Any unauthorized use,
reproduction, dissemination, distribution or other disclosure of the
contents of this e-mail or its attachments is strictly prohibited. If
you have received this email in error, please notify the sender
immediately and delete the original.
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
