Hi all, I have a board here that was fully working when booting using the tree files separated. Now im trying using a multi image file:
# mkimage -A ppc -O Linux -T multi -C gzip -n 'Linux PowerPC' -d vmlinux.bin.gz:ramdisk:board.dtb kernel.img Loading to ram: # tftpboot 0x01000000 kernel.img Booting: # bootm 0x01000000 ## Booting image at 01000000 ... Image Name: Linux PowerPC Image Type: PowerPC Linux Multi-File Image (gzip compressed) Data Size: 2627156 Bytes = 2.5 MB Load Address: 00000000 Entry Point: 00000000 Contents: Image 0: 916112 Bytes = 894.6 kB Image 1: 1698738 Bytes = 1.6 MB Image 2: 12288 Bytes = 12 kB Verifying Checksum ... OK Uncompressing Multi-File Image ... OK Loading Ramdisk to 07de2000, end 07f80bb2 ... OK Loading Device Tree to 007fc000, end 007fefff ... OK . . . RAMDISK: Couldn't find valid RAM disk image starting at 0. No filesystem could mount root, tried: ext2 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0) Im missing something? Do i have to pass the addr of ramdisk at bootm ? Thanks in advance, -- Alemao ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
