On Thu, Jun 26, 2008 at 1:55 PM, Grant Erickson
<[EMAIL PROTECTED]> wrote:
> Without knowing more about the specific origin and configuration of your
> kernel, version and configuration of u-boot and model, revision and geometry
> of NAND, it is difficult to speculate.
>
> I am using:
>
> AMCC PowerPC 405EXr
> Samsung K9F1208U0B NAND
> U-boot 1.3.3
> Linux 2.6.25-rc3-DENX
>
I'm using the following:
Cirrus Logic EP9302 (ARM920T)
ST NAND256W3A2BNG NAND
U-boot 1.3.3 modified for the EP93xx
Linux 2.8.18 + EP93xx patches
> Are you certain that u-boot and linux are in agreement about the NAND layout
> and format? I had some initial problems in that area until I applied a patch
> to u-boot (prior to 1.3.3) that addressed the issue and brought the two into
> agreement.
Can you expand on this? I've set the partition tables to be the same
between the two,
but I'm not sure what else needs to synchronized. MTD version?
--
Stuart Wood
Lab X Technologies, LLC
176 Anderson Ave.
Suite 302
Rochester, NY 14607
Phone: (585) 271-7790 x207
Fax: (585) 473.4707
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
