Hi Ben, I have found smc911x.c source code in which both 16 and 32 bit access are supported. I will test my board with this source code.
Thank you. Best Regards, Seung Youl. ----- Original Message ----- From: "Ben Warren" <[EMAIL PROTECTED]> To: "이승열" <[EMAIL PROTECTED]> Cc: <u-boot-users@lists.sourceforge.net> Sent: Monday, June 30, 2008 2:43 PM Subject: Re: [U-Boot-Users] Does U-boot support ethernet chip LAN9210 from SMSC? > On Sun, Jun 29, 2008 at 10:06 PM, 이승열 <[EMAIL PROTECTED]> wrote: >> Hi Ben, >> >> Sorry for bothering you. >> >> I have downloaded the latest version of U-boot. >> There is smc911x.c file. I have added this file to Makefile. >> The compilation is successful. > You don't have to add anything to the Makefile, just use the correct > CONFIG options >> >> But, there are two problems. >> 1. there is no LAN9210 entry in chip id list > So add it. I haven't looked at the LAN9210 data sheet to even know if > it will work with this chip. You're going to have to do some work. >> 2. Only 32-bit is supported. >> > Not true. Both 16 and 32 bit access is supported. Check the source > code (hint: look for CONFIG_DRIVER_SMC911X_16_BIT) >> Is there any recent driver for LAN9210? > > I don't know of another or I would have told you about it. > > Good luck, > Ben > ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
