Hello all,
It seems very difficult to find documentations about u-boot(or I'm simply
out of luck). I would like to get the simplest u-boot code working, but
the current image is too big. What is the best(quickest) way to disable
the network and flash capability, leave out only the basic mcu init and
serial port so that I can download to the board and verify my toolchain
and memory are working fine? The cloest board I can find is the incaip
board.
Best Regards,
--
Be Yourself @ mail.com!
Choose From 200+ Email Addresses
Get a Free Account at www.mail.com
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
