Hi Thomas,
Thomas Maenner schrieb:
> Hi Everybody,
>
> trying to use the u-boot V1.3.3 on a TQ Module:
> TQM823L-AF Rev.311
>
> which had u-boot v1.1.4 running without a problem, I now get this on two
> modules:
> --------------------
> U-Boot 1.3.3 (Jun 27 2008 - 14:45:35)
>
> CPU: PPC823EZTnnB2 at 50 MHz: 16 kB I-Cache 8 kB D-Cache
> Board: TQM823LDB0A3-E50I.311
> DRAM: 16 MB
> FLASH: ## Unknown FLASH on Bank 2 - Size = 0x00000000 = 0 MB
> 4 MB
> In: serial
> Out: serial
> Err: serial
> Net: SCC ETHERNET
> PCMCIA: No Card found
> -------------------
>
> The module has four AMD L160DB90VI onboard.
> Compiled u-boot after "make TQM823L_config" without modifications.
>
> - Anything I'm missing here?
> - Was this answered before?
>
> Thanks much for your help to point me in the right direction.
>
> Tom
Could you please change TQM823L.h:
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE +
0x400000 }
and try again?
There was a switch-over to use the CFI driver (see git history of file
TQM823L.h). AFAIK the CFI driver needs a list with fix start addresses
of each bank to start the CFI query on.
Best Regards,
Jens
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
