Hello,
We are using board pxa255, UBoot version 1.3.3, FLASH chipset is PC28F256P30B85
(two chipsets) connected to same chip select. This FLASH supports CFI and
U-Boot code has CFI_FLASH.c.
Do we need to write functions (Read, Write, erase) for this FLASH or U-Boot has
support for this already?
Regards
Amit Kumar
P.S: Please ignore the disclaimer as I cannot remove it.
**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely
for the use of the addressee(s). If you are not the intended recipient, please
notify the sender by e-mail and delete the original message. Further, you are
not
to copy, disclose, or distribute this e-mail or its contents to any other
person and
any such actions are unlawful. This e-mail may contain viruses. Infosys has
taken
every reasonable precaution to minimize this risk, but is not liable for any
damage
you may sustain as a result of any virus in this e-mail. You should carry out
your
own virus checks before opening the e-mail or attachment. Infosys reserves the
right to monitor and review the content of all messages sent to or from this
e-mail
address. Messages sent to or from this e-mail address may be stored on the
Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
