This patch fixes ppc4xx related printf format warning. Those warnings are
now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
[Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
really helpful.
Signed-off-by: Stefan Roese <[EMAIL PROTECTED]>
---
board/amcc/katmai/cmd_katmai.c | 4 ++--
board/esd/du440/du440.c | 4 ++--
board/lwmon5/sdram.c | 2 +-
board/zeus/zeus.c | 2 +-
cpu/ppc4xx/44x_spd_ddr2.c | 10 +++++-----
cpu/ppc4xx/4xx_enet.c | 2 +-
cpu/ppc4xx/denali_spd_ddr2.c | 8 ++++----
cpu/ppc4xx/tlb.c | 4 ++--
cpu/ppc4xx/traps.c | 26 +++++++++++++-------------
9 files changed, 31 insertions(+), 31 deletions(-)
diff --git a/board/amcc/katmai/cmd_katmai.c b/board/amcc/katmai/cmd_katmai.c
index 439be4f..703d225 100644
--- a/board/amcc/katmai/cmd_katmai.c
+++ b/board/amcc/katmai/cmd_katmai.c
@@ -176,7 +176,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int
argc, char *argv[])
#endif
}
#ifdef DEBUG
- printf(" pin strap0 to write in i2c = %x\n", data);
+ printf(" pin strap0 to write in i2c = %lx\n", data);
#endif /* DEBUG */
if (i2c_write(chip, 0, 1, (uchar *)&data, 4) != 0)
@@ -201,7 +201,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int
argc, char *argv[])
data |= 0x05A50000;
#ifdef DEBUG
- printf(" pin strap1 to write in i2c = %x\n", data);
+ printf(" pin strap1 to write in i2c = %lx\n", data);
#endif /* DEBUG */
udelay(1000);
diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c
index 3dbb2e1..8765cc1 100644
--- a/board/esd/du440/du440.c
+++ b/board/esd/du440/du440.c
@@ -956,9 +956,9 @@ int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char
*argv[])
ret = run_command (cmd, 0);
end = get_ticks();
- printf("ticks=%d\n", (ulong)(end - start));
+ printf("ticks=%ld\n", (ulong)(end - start));
us = (ulong)((1000L * (end - start)) / (get_tbclk() / 1000));
- printf("usec=%d\n", us);
+ printf("usec=%ld\n", us);
return ret;
}
diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c
index 0a13831..189e824 100644
--- a/board/lwmon5/sdram.c
+++ b/board/lwmon5/sdram.c
@@ -84,7 +84,7 @@ void board_add_ram_info(int use_default)
puts(" (ECC not");
get_sys_info(&board_cfg);
- printf(" enabled, %d MHz", (board_cfg.freqPLB * 2) / 1000000);
+ printf(" enabled, %ld MHz", (board_cfg.freqPLB * 2) / 1000000);
mfsdram(DDR0_03, val);
val = DDR0_03_CASLAT_DECODE(val);
diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c
index 0113d48..33d971a 100644
--- a/board/zeus/zeus.c
+++ b/board/zeus/zeus.c
@@ -280,7 +280,7 @@ static int restore_default(void)
} else {
crc = crc32(0, (u8 *)(buf + 4), FACTORY_RESET_ENV_SIZE - 4);
if (crc != *(u32 *)buf) {
- printf("ERROR: crc mismatch %08lx %08lx\n", crc, *(u32
*)buf);
+ printf("ERROR: crc mismatch %08x %08x\n", crc, *(u32
*)buf);
return -1;
}
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 9a5340c..a27e276 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -378,7 +378,7 @@ static phys_size_t sdram_memsize(void)
mem_size+=4096;
break;
default:
- printf("WARNING: Unsupported bank size
(SDSZ=0x%x)!\n"
+ printf("WARNING: Unsupported bank size
(SDSZ=0x%lx)!\n"
, sdsz);
mem_size=0;
break;
@@ -860,8 +860,8 @@ static void check_rank_number(unsigned long *dimm_populated,
if (dimm_rank > MAXRANKS) {
- printf("ERROR: DRAM DIMM detected with %d ranks
in "
- "slot %d is not supported.\n",
dimm_rank, dimm_num);
+ printf("ERROR: DRAM DIMM detected with %lu
ranks in "
+ "slot %lu is not supported.\n",
dimm_rank, dimm_num);
printf("Only %d ranks are supported for all
DIMM.\n", MAXRANKS);
printf("Replace the DIMM module with a
supported DIMM.\n\n");
spd_ddr_init_hang ();
@@ -1062,7 +1062,7 @@ static void program_copt1(unsigned long *dimm_populated,
dimm_32bit = TRUE;
break;
default:
- printf("WARNING: Detected a DIMM with a data
width of %d bits.\n",
+ printf("WARNING: Detected a DIMM with a data
width of %lu bits.\n",
data_width);
printf("Only DIMMs with 32 or 64 bit DDR-SDRAM
widths are supported.\n");
break;
@@ -1615,7 +1615,7 @@ static void program_mode(unsigned long *dimm_populated,
printf("Make sure the PLB speed is within the supported
range of the DIMMs.\n");
printf("cas3=%d cas4=%d cas5=%d\n",
cas_3_0_available, cas_4_0_available,
cas_5_0_available);
- printf("sdram_freq=%d cycle3=%d cycle4=%d
cycle5=%d\n\n",
+ printf("sdram_freq=%lu cycle3=%lu cycle4=%lu
cycle5=%lu\n\n",
sdram_freq, cycle_3_0_clk, cycle_4_0_clk,
cycle_5_0_clk);
spd_ddr_init_hang ();
}
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index c40e0ca..4e863dc 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -1076,7 +1076,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t
* bis)
bd_cached = (u32)malloc_aligned(MAL_ALLOC_SIZE, 4096);
if (!bd_cached) {
- printf("%s: Error allocating MAL descriptor
buffers!\n");
+ printf("%s: Error allocating MAL descriptor
buffers!\n", __func__);
return -1;
}
diff --git a/cpu/ppc4xx/denali_spd_ddr2.c b/cpu/ppc4xx/denali_spd_ddr2.c
index 3bd6375..670fc5c 100644
--- a/cpu/ppc4xx/denali_spd_ddr2.c
+++ b/cpu/ppc4xx/denali_spd_ddr2.c
@@ -339,7 +339,7 @@ static void get_spd_info(unsigned long dimm_ranks[],
"\n", dimm_num, ranks_on_dimm);
if (ranks_on_dimm > max_ranks_per_dimm) {
printf("WARNING: DRAM DIMM in slot %lu has %lu "
- "ranks.\n");
+ "ranks.\n", dimm_num, ranks_on_dimm);
if (1 == max_ranks_per_dimm) {
printf("Only one rank will be used.\n");
} else {
@@ -668,8 +668,8 @@ static void program_ddr0_03(unsigned long dimm_ranks[],
"and 5.0 are supported.\n");
printf("Make sure the PLB speed is within the supported range "
"of the DIMMs.\n");
- printf("sdram_freq=%d cycle2=%d cycle3=%d cycle4=%d "
- "cycle5=%d\n\n", sdram_freq, cycle_2_0_clk,
+ printf("sdram_freq=%ld cycle2=%ld cycle3=%ld cycle4=%ld "
+ "cycle5=%ld\n\n", sdram_freq, cycle_2_0_clk,
cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
spd_ddr_init_hang();
}
@@ -1248,7 +1248,7 @@ void board_add_ram_info(int use_default)
if (!is_ecc_enabled()) {
printf(" not");
}
- printf(" enabled, %d MHz", (2 * get_bus_freq(0)) / 1000000);
+ printf(" enabled, %ld MHz", (2 * get_bus_freq(0)) / 1000000);
mfsdram(DDR0_03, val);
printf(", CL%d)", DDR0_03_CASLAT_LIN_DECODE(val) >> 1);
diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c
index f44822d..24a9a9c 100644
--- a/cpu/ppc4xx/tlb.c
+++ b/cpu/ppc4xx/tlb.c
@@ -316,12 +316,12 @@ static void program_tlb_addr(u64 phys_addr,
virt_addr += TLB_1KB_SIZE;
}
} else {
- printf("ERROR: no TLB size exists for the base address
0x%0X.\n",
+ printf("ERROR: no TLB size exists for the base address
0x%llx.\n",
phys_addr);
}
if (rc != 0)
- printf("ERROR: no TLB entries available for the base
addr 0x%0X.\n",
+ printf("ERROR: no TLB entries available for the base
addr 0x%llx.\n",
phys_addr);
}
diff --git a/cpu/ppc4xx/traps.c b/cpu/ppc4xx/traps.c
index 8b7e32a..55154b6 100644
--- a/cpu/ppc4xx/traps.c
+++ b/cpu/ppc4xx/traps.c
@@ -214,7 +214,7 @@ MachineCheckException(struct pt_regs *regs)
}
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
mfsdram(DDR0_00, val) ;
- printf("DDR0: DDR0_00 %p\n", val);
+ printf("DDR0: DDR0_00 %lx\n", val);
val = (val >> 16) & 0xff;
if (val & 0x80)
printf("DDR0: At least one interrupt active\n");
@@ -263,44 +263,44 @@ MachineCheckException(struct pt_regs *regs)
break;
default:
mfsdram(DDR0_01, value2);
- printf("DDR0: No DDR0 error know 0x%x %p\n", val, value2);
+ printf("DDR0: No DDR0 error know 0x%lx %x\n", val, value2);
}
mfsdram(DDR0_23, val);
if (((val >> 16) & 0xff) && corr_ecc)
- printf("DDR0: Syndrome for correctable ECC event 0x%x\n",
+ printf("DDR0: Syndrome for correctable ECC event 0x%lx\n",
(val >> 16) & 0xff);
mfsdram(DDR0_23, val);
if (((val >> 8) & 0xff) && uncorr_ecc)
- printf("DDR0: Syndrome for uncorrectable ECC event 0x%x\n",
+ printf("DDR0: Syndrome for uncorrectable ECC event 0x%lx\n",
(val >> 8) & 0xff);
mfsdram(DDR0_33, val);
if (val)
printf("DDR0: Address of command that caused an "
- "Out-of-Range interrupt %p\n", val);
+ "Out-of-Range interrupt %lx\n", val);
mfsdram(DDR0_34, val);
if (val && uncorr_ecc)
- printf("DDR0: Address of uncorrectable ECC event %p\n", val);
+ printf("DDR0: Address of uncorrectable ECC event %lx\n", val);
mfsdram(DDR0_35, val);
if (val && uncorr_ecc)
- printf("DDR0: Address of uncorrectable ECC event %p\n", val);
+ printf("DDR0: Address of uncorrectable ECC event %lx\n", val);
mfsdram(DDR0_36, val);
if (val && uncorr_ecc)
- printf("DDR0: Data of uncorrectable ECC event 0x%08x\n", val);
+ printf("DDR0: Data of uncorrectable ECC event 0x%08lx\n", val);
mfsdram(DDR0_37, val);
if (val && uncorr_ecc)
- printf("DDR0: Data of uncorrectable ECC event 0x%08x\n", val);
+ printf("DDR0: Data of uncorrectable ECC event 0x%08lx\n", val);
mfsdram(DDR0_38, val);
if (val && corr_ecc)
- printf("DDR0: Address of correctable ECC event %p\n", val);
+ printf("DDR0: Address of correctable ECC event %lx\n", val);
mfsdram(DDR0_39, val);
if (val && corr_ecc)
- printf("DDR0: Address of correctable ECC event %p\n", val);
+ printf("DDR0: Address of correctable ECC event %lx\n", val);
mfsdram(DDR0_40, val);
if (val && corr_ecc)
- printf("DDR0: Data of correctable ECC event 0x%08x\n", val);
+ printf("DDR0: Data of correctable ECC event 0x%08lx\n", val);
mfsdram(DDR0_41, val);
if (val && corr_ecc)
- printf("DDR0: Data of correctable ECC event 0x%08x\n", val);
+ printf("DDR0: Data of correctable ECC event 0x%08lx\n", val);
#endif /* CONFIG_440EPX */
#endif /* CONFIG_440 */
show_regs(regs);
--
1.5.6.2
-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
