vijay vijay wrote: > I am using Denx u-boot 1.1.3 for MPC 870 board. > I ported it for our board with mpc870 processor and I got the > u-boot (->) prompt.
> UART interface is working fine but Ethernet interface (motfec) > is not up yet. ub> ping 10.10.10.4 > TX timeout > TX timeout > ping failed; host 10.10.10.4 is not alive There are at least two problems with your U-Boot 1.1.3 configuration: > #define CONFIG_ETHADDR OO:11:22:33:44:55 /* board MAC addr */ The first byte "OO" is two capital Os; perhaps "00" was the intended first byte of the MAC address?: #define CONFIG_ETHADDR 00:11:22:33:44:55 /* board MAC addr */ > #define CONFIG_IPADDR 10:10:10:2 /* board IP addr */ The bytes of a v4 IP number must be separated by "." (not ":"): #define CONFIG_IPADDR 10.10.10.2 /* board IP addr */ Other than the above two suggestions, please try using a U-Boot version more current than 1.1.3, such as 1.3.x. Sincerely, Ken Fuchs ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
