Hi all,
I have a board based on the MPC8360E-RDK, and im trying to
make NAND at local bus works with UPM. I put the scope to
see what was going wrong and I got this:
___
- the waveform in LGPL1/3 (nand CLE/ALE) should be ___| |___
___ ___
but was |__|
My question is: is there any regs different from those that
program the UPM (BRx, ORx) that can affect and cause this behavior?
Of course, supposing the UPM array in
u-boot/board/freescale/mpc8360erdk/nand.c is correct, that i think
it is.
Im using the same configuration located at
u-boot/include/configs/MPC8360ERDK.h
/*
* NAND flash on the local bus
*/
#define CONFIG_CMD_NAND 1
#define CONFIG_NAND_FSL_UPM 1
#define CFG_NAND_BASE 0x60000000
#define CFG_MAX_NAND_DEVICE 1
#define NAND_MAX_CHIPS 1
#define CONFIG_MTD_NAND_VERIFY_WRITE
#define CFG_LBLAWBAR1_PRELIM CFG_NAND_BASE /* Window base at flash base */
#define CFG_LBLAWAR1_PRELIM 0x8000001b /* Access window size 4K ??? */
/* Port size 8 bit, UPMA */
#define CFG_BR1_PRELIM (CFG_NAND_BASE | 0x00000881)
#define CFG_OR1_PRELIM 0xfc000001
One detail, im using u-boot-1.1.4 and i got the codes for UPM and NAND
from u-boot-1.3.4-rc1.
Cheers,
--
Alemao
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
