Hello Stelian,
Thank you for adding support for the Atmel AT91SAM9261-EK to U-boot.
But I have a question here:
Does USB-storage devices work in U-boot at your place? (e.g. 1GB USB
memory stick)
I use U-boot 1.3.4-rc1
I first ran into this problem on our custom board from which I derived
the BSP from your patchset, but I noticed that it does not seem to
work either on the AT91SAM9261-EK kit.
So, I am curious if I broke something, or if something else
fundamental is wrong here...
When I do a usb scan, It recognises 2 devices, but when it starts
looking for usb-storage devices, it takes a while, and finally it ends
up with this error:
----------------------------------------
Device NOT ready
Request Sense returned 0 0 0
----------------------------------------
Kind Regards,
Remy
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
