On Friday 01 August 2008, Wolfgang Denk wrote: > In message <[EMAIL PROTECTED]> you wrote: > > I have verified that the Sequoia (440EPx) does not have its UARTs > > properly configured. The attached patch corrects this by setting three > > bits in SDR0_PFC1 to enable 4-wire mode, and to select cts/rts > > functionality for the UARTs. Also, I modified the GPIO settings for > > We definitely do NOT want any hardware handshake on the serial > console. Never.
Ack, we don't want hardware handshake enabled in U-Boot. But if I understand this correctly, then this patch from Steven configures the RTS/CTS lines correctly (they are multiplexed with other signals), so that they *can* be used by the OS if needed. It doesn't enable hardware handshake in U-Boot. Steven please correct me if I am wrong here. Thanks. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users