The recent change to move the .bss outside of the image gives older
binutils (ld from eldk4.1/binutils-2.16) some headache:
ppc_85xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4)
ppc_85xx-ld: final link failed: Bad value
We workaround it by being explicit about the program headers and not
assigning the .bss to a program header.
Signed-off-by: Kumar Gala <[EMAIL PROTECTED]>
---
Wolfgang, can you pick this up for 1.3.4 as Andy's on vacation.
- k
board/freescale/mpc8540ads/u-boot.lds | 15 ++++++++++-----
board/freescale/mpc8541cds/u-boot.lds | 15 ++++++++++-----
board/freescale/mpc8544ds/u-boot.lds | 15 ++++++++++-----
board/freescale/mpc8548cds/u-boot.lds | 15 ++++++++++-----
board/freescale/mpc8555cds/u-boot.lds | 15 ++++++++++-----
board/freescale/mpc8560ads/u-boot.lds | 15 ++++++++++-----
board/freescale/mpc8568mds/u-boot.lds | 15 ++++++++++-----
7 files changed, 70 insertions(+), 35 deletions(-)
diff --git a/board/freescale/mpc8540ads/u-boot.lds
b/board/freescale/mpc8540ads/u-boot.lds
index 0e4f5a2..999a44f 100644
--- a/board/freescale/mpc8540ads/u-boot.lds
+++ b/board/freescale/mpc8540ads/u-boot.lds
@@ -26,6 +26,11 @@
OUTPUT_ARCH(powerpc)
/* Do we need any of these for elf?
__DYNAMIC = 0; */
+PHDRS
+{
+ text PT_LOAD;
+}
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
@@ -57,7 +62,7 @@ SECTIONS
*(.text)
*(.fixup)
*(.got1)
- }
+ } :text
_etext = .;
PROVIDE (etext = .);
.rodata :
@@ -66,7 +71,7 @@ SECTIONS
*(.rodata1)
*(.rodata.str1.4)
*(.eh_frame)
- }
+ } :text
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
@@ -118,12 +123,12 @@ SECTIONS
.bootpg ADDR(.text) + 0x7f000 :
{
cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
+ } :text = 0xffff
.resetvec ADDR(.text) + 0x7fffc :
{
*(.resetvec)
- } = 0xffff
+ } :text = 0xffff
. = ADDR(.text) + 0x80000;
@@ -134,7 +139,7 @@ SECTIONS
*(.dynbss)
*(.bss)
*(COMMON)
- }
+ } :NONE
. = ALIGN(4);
_end = . ;
diff --git a/board/freescale/mpc8541cds/u-boot.lds
b/board/freescale/mpc8541cds/u-boot.lds
index 1c583de..acb9c1c 100644
--- a/board/freescale/mpc8541cds/u-boot.lds
+++ b/board/freescale/mpc8541cds/u-boot.lds
@@ -23,6 +23,11 @@
OUTPUT_ARCH(powerpc)
/* Do we need any of these for elf?
__DYNAMIC = 0; */
+PHDRS
+{
+ text PT_LOAD;
+}
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
@@ -54,7 +59,7 @@ SECTIONS
*(.text)
*(.fixup)
*(.got1)
- }
+ } :text
_etext = .;
PROVIDE (etext = .);
.rodata :
@@ -63,7 +68,7 @@ SECTIONS
*(.rodata1)
*(.rodata.str1.4)
*(.eh_frame)
- }
+ } :text
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
@@ -115,12 +120,12 @@ SECTIONS
.bootpg ADDR(.text) + 0x7f000 :
{
cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
+ } :text = 0xffff
.resetvec ADDR(.text) + 0x7fffc :
{
*(.resetvec)
- } = 0xffff
+ } :text = 0xffff
. = ADDR(.text) + 0x80000;
@@ -131,7 +136,7 @@ SECTIONS
*(.dynbss)
*(.bss)
*(COMMON)
- }
+ } :NONE
. = ALIGN(4);
_end = . ;
diff --git a/board/freescale/mpc8544ds/u-boot.lds
b/board/freescale/mpc8544ds/u-boot.lds
index 500e647..05010ca 100644
--- a/board/freescale/mpc8544ds/u-boot.lds
+++ b/board/freescale/mpc8544ds/u-boot.lds
@@ -23,6 +23,11 @@
OUTPUT_ARCH(powerpc)
/* Do we need any of these for elf?
__DYNAMIC = 0; */
+PHDRS
+{
+ text PT_LOAD;
+}
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
@@ -54,7 +59,7 @@ SECTIONS
*(.text)
*(.fixup)
*(.got1)
- }
+ } :text
_etext = .;
PROVIDE (etext = .);
.rodata :
@@ -63,7 +68,7 @@ SECTIONS
*(.rodata1)
*(.rodata.str1.4)
*(.eh_frame)
- }
+ } :text
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
@@ -115,12 +120,12 @@ SECTIONS
.bootpg ADDR(.text) + 0x7f000 :
{
cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
+ } :text = 0xffff
.resetvec ADDR(.text) + 0x7fffc :
{
*(.resetvec)
- } = 0xffff
+ } :text = 0xffff
. = ADDR(.text) + 0x80000;
@@ -131,7 +136,7 @@ SECTIONS
*(.dynbss)
*(.bss)
*(COMMON)
- }
+ } :NONE
. = ALIGN(4);
_end = . ;
diff --git a/board/freescale/mpc8548cds/u-boot.lds
b/board/freescale/mpc8548cds/u-boot.lds
index 6b93395..f4e6e15 100644
--- a/board/freescale/mpc8548cds/u-boot.lds
+++ b/board/freescale/mpc8548cds/u-boot.lds
@@ -23,6 +23,11 @@
OUTPUT_ARCH(powerpc)
/* Do we need any of these for elf?
__DYNAMIC = 0; */
+PHDRS
+{
+ text PT_LOAD;
+}
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
@@ -54,7 +59,7 @@ SECTIONS
*(.text)
*(.fixup)
*(.got1)
- }
+ } :text
_etext = .;
PROVIDE (etext = .);
.rodata :
@@ -63,7 +68,7 @@ SECTIONS
*(.rodata1)
*(.rodata.str1.4)
*(.eh_frame)
- }
+ } :text
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
@@ -115,12 +120,12 @@ SECTIONS
.bootpg ADDR(.text) + 0x7f000 :
{
cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
+ } :text = 0xffff
.resetvec ADDR(.text) + 0x7fffc :
{
*(.resetvec)
- } = 0xffff
+ } :text = 0xffff
. = ADDR(.text) + 0x80000;
@@ -131,7 +136,7 @@ SECTIONS
*(.dynbss)
*(.bss)
*(COMMON)
- }
+ } :NONE
. = ALIGN(4);
_end = . ;
diff --git a/board/freescale/mpc8555cds/u-boot.lds
b/board/freescale/mpc8555cds/u-boot.lds
index a18b3a7..525c2e1 100644
--- a/board/freescale/mpc8555cds/u-boot.lds
+++ b/board/freescale/mpc8555cds/u-boot.lds
@@ -23,6 +23,11 @@
OUTPUT_ARCH(powerpc)
/* Do we need any of these for elf?
__DYNAMIC = 0; */
+PHDRS
+{
+ text PT_LOAD;
+}
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
@@ -54,7 +59,7 @@ SECTIONS
*(.text)
*(.fixup)
*(.got1)
- }
+ } :text
_etext = .;
PROVIDE (etext = .);
.rodata :
@@ -63,7 +68,7 @@ SECTIONS
*(.rodata1)
*(.rodata.str1.4)
*(.eh_frame)
- }
+ } :text
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
@@ -115,12 +120,12 @@ SECTIONS
.bootpg ADDR(.text) + 0x7f000 :
{
cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
+ } :text = 0xffff
.resetvec ADDR(.text) + 0x7fffc :
{
*(.resetvec)
- } = 0xffff
+ } :text = 0xffff
. = ADDR(.text) + 0x80000;
@@ -131,7 +136,7 @@ SECTIONS
*(.dynbss)
*(.bss)
*(COMMON)
- }
+ } :NONE
. = ALIGN(4);
_end = . ;
diff --git a/board/freescale/mpc8560ads/u-boot.lds
b/board/freescale/mpc8560ads/u-boot.lds
index 0e4f5a2..999a44f 100644
--- a/board/freescale/mpc8560ads/u-boot.lds
+++ b/board/freescale/mpc8560ads/u-boot.lds
@@ -26,6 +26,11 @@
OUTPUT_ARCH(powerpc)
/* Do we need any of these for elf?
__DYNAMIC = 0; */
+PHDRS
+{
+ text PT_LOAD;
+}
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
@@ -57,7 +62,7 @@ SECTIONS
*(.text)
*(.fixup)
*(.got1)
- }
+ } :text
_etext = .;
PROVIDE (etext = .);
.rodata :
@@ -66,7 +71,7 @@ SECTIONS
*(.rodata1)
*(.rodata.str1.4)
*(.eh_frame)
- }
+ } :text
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
@@ -118,12 +123,12 @@ SECTIONS
.bootpg ADDR(.text) + 0x7f000 :
{
cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
+ } :text = 0xffff
.resetvec ADDR(.text) + 0x7fffc :
{
*(.resetvec)
- } = 0xffff
+ } :text = 0xffff
. = ADDR(.text) + 0x80000;
@@ -134,7 +139,7 @@ SECTIONS
*(.dynbss)
*(.bss)
*(COMMON)
- }
+ } :NONE
. = ALIGN(4);
_end = . ;
diff --git a/board/freescale/mpc8568mds/u-boot.lds
b/board/freescale/mpc8568mds/u-boot.lds
index 9d245e4..52b5758 100644
--- a/board/freescale/mpc8568mds/u-boot.lds
+++ b/board/freescale/mpc8568mds/u-boot.lds
@@ -23,6 +23,11 @@
OUTPUT_ARCH(powerpc)
/* Do we need any of these for elf?
__DYNAMIC = 0; */
+PHDRS
+{
+ text PT_LOAD;
+}
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
@@ -54,7 +59,7 @@ SECTIONS
*(.text)
*(.fixup)
*(.got1)
- }
+ } :text
_etext = .;
PROVIDE (etext = .);
.rodata :
@@ -63,7 +68,7 @@ SECTIONS
*(.rodata1)
*(.rodata.str1.4)
*(.eh_frame)
- }
+ } :text
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
@@ -115,12 +120,12 @@ SECTIONS
.bootpg ADDR(.text) + 0x7f000 :
{
cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
+ } :text = 0xffff
.resetvec ADDR(.text) + 0x7fffc :
{
*(.resetvec)
- } = 0xffff
+ } :text = 0xffff
. = ADDR(.text) + 0x80000;
@@ -131,7 +136,7 @@ SECTIONS
*(.dynbss)
*(.bss)
*(COMMON)
- }
+ } :NONE
. = ALIGN(4);
_end = . ;
--
1.5.5.1
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
