Hello All, I have an Atmel AT91SAM9263 evaluation board with an arm926ejs based processor. I want to configure U-boot for this and want to have a USB device boot option available too. Though the U-boot will be in NAND Flash but i want the board to boot from a USB device like a USB Flash drive etc.
I was reading the README and it talks about configuring a large number of options. Where do I define these options? Which file? if i give the command $ make arm926ejs_config if comes with a message make: *** No rule to make target 'arm926ejs_config'. Stop. Can anybody help me in how to obtain a .bin file for my processor that i can load in NANDFlash and use thus U-boot. Many Thanks Aman. ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
