Dear Nitin Saxena,

In message <> you 
> I am using U-Boot 1.1.1 as bootloader and using OCTEON-CN58XX
> processor. There are 16 GPIO pins in the processor. Each pin can be
> configured as an interrupt pin. I want to test these pins in U-boot
> itself by first triggering the interrupts for each pin and then
> handling these interrupts in U-Boot. I have the simple executive APIs
> provided from processor vendor-CAVIUM.
> My question is "Can I use simple executive APIs in u-boot for
> triggering and handling the interrupts". If yes, please suggest how I
> should proceed.

U-Boot 1.1.1 is extremely old (and  basicly  unsupported  because  of
that),  and  the  Cavium  port  of U-Boot to the Octeons is completey
out-of-tree and unknown to us.

Sorry, we can't help you with that. Please push Cavium to  get  their
code included into mainline, and all would benefit from it.

Best regards,

Wolfgang Denk

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email:
For every complex problem, there is a solution that is simple,  neat,
and wrong.                                           -- H. L. Mencken

OpenSolaris 2009.06 is a cutting edge operating system for enterprises 
looking to deploy the next generation of Solaris that includes the latest 
innovations from Sun and the OpenSource community. Download a copy and 
enjoy capabilities such as Networking, Storage and Virtualization. 
Go to:
U-Boot-Users mailing list

Reply via email to