Dear Kumar Gala, In message <[EMAIL PROTECTED]> you wrote: > From: Jon Loeliger <[EMAIL PROTECTED]> > > Signed-off-by: Jon Loeliger <[EMAIL PROTECTED]> > Signed-off-by: Kumar Gala <[EMAIL PROTECTED]> > --- > board/freescale/mpc8548cds/Makefile | 1 + > board/freescale/mpc8548cds/ddr.c | 268 > +++++++++++++++++++++++++++++++ > board/freescale/mpc8548cds/mpc8548cds.c | 12 ++- > include/configs/MPC8548CDS.h | 49 +++++-- > 4 files changed, 318 insertions(+), 12 deletions(-) > create mode 100644 board/freescale/mpc8548cds/ddr.c
What about converting all the other, non-FSL boards? Does it make sense? Is there any recommendation to the board maintainers about conditions when such a conversion is recommended or should not be done? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] If at first you don't succeed, you are running about average. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
