Dear Ben Warren, In message <[EMAIL PROTECTED]> you wrote: > > The following changes since commit b5710d9974f6f0f3ddb4e67d6cccc262ab37049e: > Kumar Gala (1): > FSL DDR: Remove old SPD support from cpu/mpc86xx > > are available in the git repository at: > > git://git.denx.de/u-boot-net.git master > > Andrew Dyer (1): > dm9000 remove dead external phy support, gpio fix > > Ben Warren (7): > Moved initialization of FSL_MCDMAFEC Ethernet driver to CPU directory > Moved initialization of MCFFEC Ethernet driver to CPU directory > Moved initialization of GRETH Ethernet driver to CPU directory > Moved initialization of Blackfin EMAC Ethernet controller to > board_eth_init() > Moved initialization of ULI526X Ethernet driver to board code. > Moved conditional compilation to Makefile for SK98 Ethernet driver > Moved initialization of SKGE Ethernet driver to board code. > > Peter Tyser (1): > Standardize bootp, tftpboot, rarpboot, dhcp, and nfs command > descriptions > > Remy Bohmer (2): > Fix compile error when CONFIG_BOOTP_RANDOM_DELAY is set. > Fix bogus error message in the DHCP handler > > TsiChung Liew (2): > Fix ColdFire FEC warning messages > ColdFire: Add FEC Buffer descriptors in SRAM > > board/bf537-stamp/bf537-stamp.c | 10 ++ > board/freescale/mpc8610hpcd/mpc8610hpcd.c | 10 ++ > board/sl8245/sl8245.c | 13 +++ > common/cmd_net.c | 10 +- > cpu/leon2/cpu.c | 9 ++ > cpu/leon3/cpu.c | 8 ++ > cpu/mcf523x/cpu.c | 14 +++ > cpu/mcf52x2/cpu.c | 15 +++ > cpu/mcf532x/cpu.c | 14 +++ > cpu/mcf5445x/cpu.c | 14 +++ > cpu/mcf547x_8x/cpu.c | 21 ++++ > drivers/net/bfin_mac.c | 2 +- > drivers/net/dm9000x.c | 159 > +++-------------------------- > drivers/net/dm9000x.h | 21 ++++ > drivers/net/fsl_mcdmafec.c | 19 ++-- > drivers/net/greth.c | 2 +- > drivers/net/mcffec.c | 40 +++++++- > drivers/net/sk98lin/Makefile | 20 +--- > drivers/net/sk98lin/skaddr.c | 4 - > drivers/net/sk98lin/skcsum.c | 4 - > drivers/net/sk98lin/skge.c | 4 - > drivers/net/sk98lin/skgehwt.c | 5 - > drivers/net/sk98lin/skgeinit.c | 4 - > drivers/net/sk98lin/skgemib.c | 4 - > drivers/net/sk98lin/skgepnmi.c | 4 - > drivers/net/sk98lin/skgesirq.c | 4 - > drivers/net/sk98lin/ski2c.c | 4 - > drivers/net/sk98lin/sklm80.c | 4 - > drivers/net/sk98lin/skproc.c | 4 - > drivers/net/sk98lin/skqueue.c | 4 - > drivers/net/sk98lin/skrlmt.c | 4 - > drivers/net/sk98lin/sktimer.c | 4 - > drivers/net/sk98lin/skvpd.c | 4 - > drivers/net/sk98lin/skxmac2.c | 4 - > drivers/net/sk98lin/uboot_drv.c | 8 +-- > drivers/net/sk98lin/uboot_skb.c | 5 - > net/bootp.c | 3 + > net/bootp.h | 2 +- > net/eth.c | 24 ----- > 39 files changed, 227 insertions(+), 281 deletions(-)
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] If God wanted me to touch my toes, he'd have put them on my knees. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot