Hi, Victor Victor Gallardo wrote: > > Hi Felix, > > Here is my BDI configuration file for Canyonlands. > > This one should work for you. This one configures OCM instead DDR. > > -Victor Gallardo > > Your configuration works fine, thanks a lot.
Felix. > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Felix Radensky > Sent: Monday, September 01, 2008 9:43 AM > To: U-Boot > Subject: [U-Boot] Burning U-boot on 460EX using BDI3000 > > Hi, > > Can U-boot be burned on 460EX based board (using BDI3000) without > configuring DDR controller ? The BDI configuration file for Canyonlands > board on Denx site > http://www.denx.de/wiki/view/DULG/Appendix#Section_13.1. > has no DDR setup, but also doesn't work on Canyonlands (fails on flash > erase). The configuration file from AMCC site does work, but it contains > full DDR setup. > > Thanks a lot. > > Felix. > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot