Hello, I need to port U-Boot on the platform, consisting of master and daughter boards. Master boards runs WinCE; daughter board features SoC, based on ARM926EJ-S, on-chip SDRAM and ROM. Master launches daughter board by downloading binary image of bootcode in to the on-chip SDRAM, then does remap (i.e. 0x0 points at SDRAM) and boot loader starts off.
Therefore I'm wondering -- will U-Boot be fine with such a boot mode, usually systems start from flash (NOR or NAND), but here it's in RAM. I believe it should be OK, but just want to make sure. Looking forward to receiving feedback from you. Thanks. -- Roman Mashak _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot