Hello people,
here is a quick fix for the output of the command usb storage. It was printing
"Device 0: not available" because the IF_TYPE_USB was not included into the
switch statement.
--- u-boot-1.3.4.original/disk/part.c 2008-08-12 11:08:38.000000000 -0300
+++ u-boot-1.3.4/disk/part.c 2008-09-04 14:48:55.000000000 -0300
@@ -124,6 +124,12 @@ void dev_print (block_dev_desc_t *dev_de
dev_desc->revision,
dev_desc->product);
break;
+ case IF_TYPE_USB:
+ printf ("Vendor: %s Rev: %s Prod: %s\n",
+ dev_desc->vendor,
+ dev_desc->revision,
+ dev_desc->product);
+ break;
case IF_TYPE_UNKNOWN:
default:
puts ("not available\n");
--
Now, for example, with my usb kingston datatraveller, it correctly prints:
U-Boot> usb storage
Device 0: Vendor: Kingston Rev: 1.00 Prod: DataTraveler 2.0
Type: Removable Hard Disk
Capacity: 1956.5 MB = 1.9 GB (4006912 x 512)
Regards,
Nícolas
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
