Dear Matthias, in message <[EMAIL PROTECTED]> you wrote: > > after testing the recent U-Boot code on a couple of 405EP boards I noticed, > that the memsize in the output of the "bdinfo" command is always 0x00000000. > > This is caused by using 64 types and format directives in printf that only > work when CFG_64BIT_VSPRINTF is defined.
Yeah, that's one more of these ugly bugs. > So what's the best way to fix this? > Here are four solutions. My favorite is no. 2. > > 1) Define CFG_64BIT_STRTOUL for all effected board. > Currently all 405 boards have memsize output as 0 in bdinfo. > > 2) Define CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all 4xx boards in > include/ppc4xx.h: ... > 3) Generally define CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all boards. > > 4) Use an (ugly) workaround in common/cmd_bdinfo.c: I vote for # 5: 5) Delete al references to CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL and unconditionally enable it for all boards. Any takers to submit a patch? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] "One day," said a dull voice from down below, "I'm going to be back in form again and you're going to be very sorry you said that. For a very long time. I might even go so far as to make even more Time just for you to be sorry in." - Terry Pratchett, _Small Gods_ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot