and setup the Portpins for using I2C.
Signed-off-by: Heiko Schocher <[EMAIL PROTECTED]>
---
board/muas3001/muas3001.c | 9 +++++++--
include/configs/muas3001.h | 2 +-
2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/board/muas3001/muas3001.c b/board/muas3001/muas3001.c
index 0ec451f..157c72d 100644
--- a/board/muas3001/muas3001.c
+++ b/board/muas3001/muas3001.c
@@ -163,8 +163,13 @@ const iop_conf_t iop_conf_tab[4][32] = {
/* PD18 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */
/* PD17 */ { 0, 0, 0, 0, 0, 0 }, /* PD17 */
/* PD16 */ { 0, 0, 0, 0, 0, 0 }, /* PD16 */
- /* PD15 */ { 1, 1, 1, 0, 0, 0 }, /* I2C SDA */
- /* PD14 */ { 1, 1, 1, 0, 0, 0 }, /* I2C SCL */
+#if defined(CONFIG_HARD_I2C)
+ /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
+ /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
+#else
+ /* PD15 */ { 1, 0, 0, 0, 1, 1 }, /* PD15 */
+ /* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* PD14 */
+#endif
/* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
/* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
/* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h
index bc085b8..a13648b 100644
--- a/include/configs/muas3001.h
+++ b/include/configs/muas3001.h
@@ -395,7 +395,7 @@
#define CFG_IO_SIZE 1
#define CFG_BR4_PRELIM ((CFG_IO_BASE & BRx_BA_MSK) |\
- BRx_PS_32 | BRx_MS_GPCM_L | BRx_V)
+ BRx_PS_16 | BRx_MS_GPCM_L | BRx_V)
#define CFG_OR4_PRELIM (0xfff80020)
--
1.5.6.1
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
