Previous timeout was 50 seconds which is a pain to wait for if you
have a system with no ethernet cable attached. Reduce this to 2.5
seconds as a compomise between fast boot and time needed by the PHY.
Signed-off-by: Wolfgang Denk <[EMAIL PROTECTED]>
---
drivers/net/mpc512x_fec.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/mpc512x_fec.c b/drivers/net/mpc512x_fec.c
index 54283fb..7078c4e 100644
--- a/drivers/net/mpc512x_fec.c
+++ b/drivers/net/mpc512x_fec.c
@@ -364,7 +364,7 @@ int mpc512x_fec_init_phy (struct eth_device *dev, bd_t *
bis)
/*
* Wait for AN completion
*/
- timeout = 50000;
+ timeout = 2500;
do {
udelay (1000);
--
1.5.4.2
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
