Dear Batsayan Das,
In message <[EMAIL PROTECTED]> you wrote:
>
> When we execute "bootm 0x5000000" command it gives the "Starting kernel
> ...". After that nothing is printed in the serial console. We have
> verified "http://www.denx.de/wiki/view/DULG/LinuxPostMortemAnalysis"; that
> "__log_buf" gives the exact booting sequences what we used to get when
> running vmlinux.bin from BDI.
This is no longer a U-Boot issue but a Linux kernel problem.
On ARM systems, one of the top ranking reeasons for such a type of
problem is that you pass an incorrect/nonmatching machine ID to the
kernel.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Our universe is a fragile house of atoms, held together by the mortar
of cause-and-effect. One magician would be two too many.
- Terry Pratchett, _The Dark Side of the Sun_
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
