On Thu, 18 Sep 2008, Shinya Kuribayashi wrote: > Hi Guennadi, > > Guennadi Liakhovetski wrote: > > Signed-off-by: Guennadi Liakhovetski <[EMAIL PROTECTED]> > > --- > > > > diff -u /dev/null doc/README.imx31 > > --- /dev/null 2008-08-28 10:21:05.503011301 +0200 > > +++ doc/README.imx31 2008-08-28 12:15:21.000000000 +0200 > > @@ -0,0 +1,13 @@ > > +i.MX31 specific Configuration Options: > > +-------------------------------------- > > + > > +- Timer precision: > > + CONFIG_MX31_TIMER_HIGH_PRECISION > > + > > + Enable higher precision timer. The low-precision timer > > + (default) provides approximately 4% error, whereas the > > + high-precision timer is about 0.4% accurate. The extra > > + accuracy is achieved at the cost of higher computational > > + overhead, which, in places where time is measured, should > > + not be critical, so, it should be safe to enable this > > + option. > > I'm not familiar with the maintainance policy of README and doc/*, but > is there any reasone this README.imx31 is sitting on the top of tree? > Should be marged into $(TOPDIR)/README, or moved to doc/ directory? > > Noticed a few minutes ago, so just let you know...
> > +++ doc/README.imx31 2008-08-28 12:15:21.000000000 +0200 Looks like doc/ to me. Thanks Guennadi --- Guennadi Liakhovetski, Ph.D. DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
