>>Can you retry and copy-paste the console output?
...
(Re)start USB...
USB: scanning bus for devices... cannot reset port 1!?
2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
=> fatload usb 0:1 0x8e000000 uImage
reading uImage
.
.
.
.
................................................................................
............................................
1278020 bytes read
=> bootm
* kernel: default image load address = 0x8e000000
Wrong Image Format for bootm command
ERROR: can't get kernel image!
...
>>can you do a 'file uImage' and copy the result ?
...
[EMAIL PROTECTED] boot]# file uImage
uImage: PPCBoot image
...
I tried and send you its log.
Thank you for answer
Best regards,
--
View this message in context:
http://www.nabble.com/-UBoot--Hows-to-boot-Linux-Kernel-from-USB-tp19740267p19755115.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
