Hi all,
In my MPC8360 board I have the BMS bit (from the reset configuration
word high register, CFG_HRCW_HIGH in u-boot) seted to '0', that means:
8 Mbytes at 0x0000_0000 to 0x007F_FFFF
But then still in u-boot I set my DDR & Flash:
CFG_DDR_BASE 0x00000000
CFG_FLASH_BASE 0xFF000000
So it wont conflict? Or the reset configuration word is used only when
the core comes out of reset and then u-boot remmap things to
CFG_DDR_BASE and CFG_FLASH_BASE?
My new flash is only 1MB, so can i set CFG_FLASH_BASE 0xFFF00000 ?
Or it has a minimum like 8MB (0xFF800000) ?
Thanks in advance
--
Alemao
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
