Hi, [EMAIL PROTECTED] wrote: > Hi, > > on the matter of getting u-boot work with the ADI Sidewinder Reference > Platform, I found the previously posted patches and used them as starting > point for my own patch set. > The Sidewinder board works with this patch, including ECC (optional). > > There is a minimum set of ifdefs in cpu/ixp/start.S and no board-specific > low-level.S and thus no endless code-duplication. The > SDRAM parameters are handled by configuration definitions. > The ixp425.h and ixp465.h header files should be merged but that can > follow in a different patch, possibly renaming the defines and fixing all > board specific code. > I think that you use my patchset. It is true? > The new initialisation routine was also tested on an IXP425, it really > works on both. > Great :) > The npe_less_fw.patch allows to have NPE-C firmware and still use NPE-B. > There is no need to load firmware to NPE-C if you are not going to use it. > > This work was done for Erhardt+Leimer GmbH. > > > Regards Michael
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot