Thanks David Hawkins,
> -----Original Message----- > From: David Hawkins [mailto:[EMAIL PROTECTED] > Sent: 2008?10?8? 11:51 AM > To: [email protected] > Cc: Liu Dave-R63238; Phillips Kim-R1AAHA > Subject: Re: [U-Boot-Users] Freescale MPC8349EMDS BCSR corruption > > > Hi Dave and Kim, > > Freescale support got back to me regarding the BCSR > corruption error. They determined there was a bug in > the v1.2 BCSR code, and now have a v1.3. > > For anyone else with an MDS board, if you want to > update your BCSR, submit a SR to Freescale and > ask for the v1.3 EEPROM file, or ask me and I'll send > the file. > > I didn't have any Xilinx FPGA boards, so didn't have > any programming cables. So I programmed an Altera > FPGA board to act as a Xilinx Parallel Cable III > (the web has the schematic), and downloaded the old > version of the Xilinx ISE 9.2i tools, since they has > support for that cable. I used the iMPACT tool to > detect the devices in the JTAG chain (EEPROM and > Spartan) and then used it to program the EEPROM. > > The BCSR version register reads back as v1.3. > > The erroneous over-write of the BCSR[0] register > no longer occurs. > > Cheers, > Dave > > > _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
