Dear Kim, In message <[EMAIL PROTECTED]> Anton Vorontsov wrote: > Currently 64M of LBC SDRAM are mapped at 0xF0000000 which makes > it difficult to use (b/c then the memory is discontinuous and > there is quite big memory hole between the DDR/SDRAM regions). > > This patch reworks LBC SDRAM setup so that now we dynamically > place the LBC SDRAM near the DDR (or at 0x0 if there isn't any > DDR memory). > > With this patch we're able to: > > - Boot without external DDR memory; > - Use most "DDR + SDRAM" setups without need to support for > sparse/discontinuous memory model in the software. > > Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]> > --- > board/freescale/mpc8360emds/mpc8360emds.c | 39 > ++++++++++++++++++++--------- > include/configs/MPC8360EMDS.h | 25 ++++++++---------- > 2 files changed, 38 insertions(+), 26 deletions(-)
I think this patch was not added, nor was any feedback sent? Please comment. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] "There are three principal ways to lose money: wine, women, and en- gineers. While the first two are more pleasant, the third is by far the more certain." -- Baron Rothschild, ca. 1800 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
