following patch solves the compiler warning for the
mgsuvd board, using the soft_i2c driver:
[EMAIL PROTECTED] u-boot]$ ./MAKEALL mgsuvd
Configuring for mgsuvd board...
soft_i2c.c: In function 'write_byte':
soft_i2c.c:209: warning: implicit declaration of function 'i2c_soft_read_pin'
text data bss dec hex filename
174608 9712 28436 212756 33f14 ./u-boot
[EMAIL PROTECTED] u-boot]$
Signed-off-by: Heiko Schocher <[EMAIL PROTECTED]>
---
drivers/i2c/soft_i2c.c | 2 ++
include/configs/mgsuvd.h | 1 +
include/i2c.h | 4 ++++
3 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index 0a9feb6..346125e 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -41,6 +41,8 @@
#endif
#include <i2c.h>
+CONFIG_I2C_SOFT_EXTERN
+
/* #define DEBUG_I2C */
#ifdef DEBUG_I2C
diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h
index 4ecaeac..2171115 100644
--- a/include/configs/mgsuvd.h
+++ b/include/configs/mgsuvd.h
@@ -356,6 +356,7 @@
#define I2C_ACTIVE do {} while (0)
#define I2C_TRISTATE do {} while (0)
+#define CONFIG_I2C_SOFT_EXTERN extern int i2c_soft_read_pin (void);
#define I2C_READ i2c_soft_read_pin ()
#define I2C_SDA(bit) if(bit) { \
*(unsigned short *)(I2C_BASE_DIR) &=
~SDA_CONF; \
diff --git a/include/i2c.h b/include/i2c.h
index 9f771dd..24d535f 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -76,6 +76,10 @@
# define I2C_SOFT_DECLARATIONS
# endif
#endif
+
+#ifndef CONFIG_I2C_SOFT_EXTERN
+#define CONFIG_I2C_SOFT_EXTERN
+#endif
/*
* Initialization, must be called once on start up, may be called
* repeatedly to change the speed and slave addresses.
--
1.5.6.1
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
