Signed-off-by: Heiko Schocher <[EMAIL PROTECTED]>
---
This Patch replaces the Patch:

http://lists.denx.de/pipermail/u-boot/2008-October/041890.html
[U-Boot] [POWERPC] mgsuvd: fix compiler warning when using soft_i2c driver

 board/keymile/common/common.c |    3 ++-
 board/keymile/mgsuvd/mgsuvd.c |   12 +-----------
 drivers/i2c/soft_i2c.c        |    4 ++++
 include/configs/mgsuvd.h      |   26 +++++++++++++++++---------
 4 files changed, 24 insertions(+), 21 deletions(-)

diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
index 61276d2..08cb1ef 100644
--- a/board/keymile/common/common.c
+++ b/board/keymile/common/common.c
@@ -34,6 +34,7 @@
 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
 #include <i2c.h>
 #endif
+#include <asm/io.h>

 extern int i2c_soft_read_pin (void);

@@ -400,7 +401,7 @@ static void set_scl (int state)

 static int get_sda (void)
 {
-       return i2c_soft_read_pin ();
+       return  I2C_READ;
 }

 static int get_scl (void)
diff --git a/board/keymile/mgsuvd/mgsuvd.c b/board/keymile/mgsuvd/mgsuvd.c
index ec13746..ba240b8 100644
--- a/board/keymile/mgsuvd/mgsuvd.c
+++ b/board/keymile/mgsuvd/mgsuvd.c
@@ -22,6 +22,7 @@
  */
 #include <common.h>
 #include <mpc8xx.h>
+#include <asm/io.h>

 #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
 #include <libfdt.h>
@@ -226,14 +227,3 @@ void ft_board_setup(void *blob, bd_t *bd)
        ft_blob_update (blob, bd);
 }
 #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
-
-int i2c_soft_read_pin (void)
-{
-       int val;
-
-       *(unsigned short *)(I2C_BASE_DIR) &=  ~SDA_CONF;
-       udelay(1);
-       val = *(unsigned char *)(I2C_BASE_PORT);
-
-       return ((val & SDA_BIT) == SDA_BIT);
-}
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index 508d3d7..ebe60e2 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -28,6 +28,7 @@
 #include <common.h>
 #ifdef CONFIG_MPC8260                  /* only valid for MPC8260 */
 #include <ioports.h>
+#include <asm/io.h>
 #endif
 #ifdef CONFIG_AT91RM9200               /* need this for the at91rm9200 */
 #include <asm/io.h>
@@ -39,6 +40,9 @@
 #ifdef CONFIG_LPC2292
 #include <asm/arch/hardware.h>
 #endif
+#ifdef CONFIG_MPC866                   /* only valid for MPC866 */
+#include <asm/io.h>
+#endif
 #include <i2c.h>

 /* #define     DEBUG_I2C       */
diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h
index 7a80dad..32b636f 100644
--- a/include/configs/mgsuvd.h
+++ b/include/configs/mgsuvd.h
@@ -346,8 +346,10 @@
 /*
  * Software (bit-bang) I2C driver configuration
  */
-#define I2C_BASE_DIR   (CONFIG_SYS_PIGGY_BASE + 0x04)
-#define I2C_BASE_PORT  (CONFIG_SYS_PIGGY_BASE + 0x09)
+#define I2C_BASE_DIR   (volatile unsigned short __iomem *) \
+                       (CONFIG_SYS_PIGGY_BASE + 0x04)
+#define I2C_BASE_PORT  (volatile unsigned char __iomem *) \
+                       (CONFIG_SYS_PIGGY_BASE + 0x09)

 #define SDA_BIT                0x40
 #define SCL_BIT                0x80
@@ -356,20 +358,26 @@

 #define I2C_ACTIVE     do {} while (0)
 #define I2C_TRISTATE   do {} while (0)
-#define I2C_READ       i2c_soft_read_pin ()
+#define I2C_READ        ((in_8(I2C_BASE_PORT) & SDA_BIT) == SDA_BIT)
 #define I2C_SDA(bit)   if(bit) { \
-                               *(unsigned short *)(I2C_BASE_DIR) &=  
~SDA_CONF; \
+                               out_be16(I2C_BASE_DIR, \
+                                       in_be16(I2C_BASE_DIR) &  ~SDA_CONF); \
                                } \
                        else    { \
-                               *(unsigned char *)(I2C_BASE_PORT) &= ~SDA_BIT; \
-                               *(unsigned short *)(I2C_BASE_DIR) |= SDA_CONF; \
+                               out_8(I2C_BASE_PORT, \
+                                       in_8(I2C_BASE_PORT) & ~SDA_BIT); \
+                               out_be16(I2C_BASE_DIR, \
+                                       in_be16(I2C_BASE_DIR) | SDA_CONF); \
                                }
 #define I2C_SCL(bit)   if(bit) { \
-                               *(unsigned short *)(I2C_BASE_DIR) &=  
~SCL_CONF; \
+                               out_be16(I2C_BASE_DIR, \
+                                       in_be16(I2C_BASE_DIR) &  ~SCL_CONF); \
                                } \
                        else    { \
-                               *(unsigned char *)(I2C_BASE_PORT) &= ~SCL_BIT; \
-                               *(unsigned short *)(I2C_BASE_DIR) |= SCL_CONF; \
+                               out_8(I2C_BASE_PORT, \
+                                       in_8(I2C_BASE_PORT) & ~SCL_BIT); \
+                               out_be16(I2C_BASE_DIR, \
+                                       in_be16(I2C_BASE_DIR) | SCL_CONF); \
                                }
 #define I2C_DELAY      udelay(50)      /* 1/4 I2C clock duration */

-- 
1.5.6.1

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to