Dear Francesco,
In message <[EMAIL PROTECTED]> you wrote:
>
> I'm facing problems when I try to erase flash memory on my embedded
> board (it's a custom Mainstone board, based on PXA270 ).
> I'm using u-boot 1.1.4 (since it is the only version with patch for
> Mainstone),
You are using a very old software version with unknown out-of-tree
patches and probably additional (unknown to us) modifications for
your custom (unknown to us) board.
This is not a good base to halp you.
Since 1.1.4, *many* changes have gone into the CFI flash driver (and
into many other areas, too).
You may want to port a more recent version of U-Boot to your hardware.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Is not that the nature of men and women -- that the pleasure is in
the learning of each other?
-- Natira, the High Priestess of Yonada, "For the World is
Hollow and I Have Touched the Sky", stardate 5476.3.
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
