Hi, Yes we require this initialization of the switch for network operation.
--Nagesh. wd wrote: > > Dear "Nagesh.ML", > > In message <[EMAIL PROTECTED]> you wrote: >> >> In one of my standalone application used for initializing the >> hardware(Ethernet Switch) registers, I have exported two functions >> miiphy_read() and miiphy_write() of u-boot as per the procedure given in >> README.standalone document. By doing so, will my standalone application >> come >> under GPL? If yes, is there any other way to implement this? > > Is this initialization necessary for the network operation in U-Boot? > > Best regards, > > Wolfgang Denk > > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] > If you believe that feeling bad or worrying long enough will change a > past or future event, then you are residing on another planet with a > different reality system. > _______________________________________________ > U-Boot mailing list > [email protected] > http://lists.denx.de/mailman/listinfo/u-boot > > -- View this message in context: http://www.nabble.com/-U-boot--Export-functions-using-Jumptable-in-Standalone-application-tp20144414p20201180.html Sent from the Uboot - Users mailing list archive at Nabble.com. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
