The DDR1 LAW will precedence the DDR2 LAW, so remove
the second DDR LAW.
Signed-off-by: Dave Liu <[EMAIL PROTECTED]>
---
board/freescale/mpc8641hpcn/law.c | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/board/freescale/mpc8641hpcn/law.c
b/board/freescale/mpc8641hpcn/law.c
index 182b4c5..8e13728 100644
--- a/board/freescale/mpc8641hpcn/law.c
+++ b/board/freescale/mpc8641hpcn/law.c
@@ -55,9 +55,6 @@ struct law_entry law_table[] = {
SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
SET_LAW((CONFIG_SYS_FLASH_BASE & 0xfe000000), LAW_SIZE_32M,
LAW_TRGT_IF_LBC),
-#if !defined(CONFIG_SPD_EEPROM)
- SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
-#endif
SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
};
--
1.5.4
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
