Dear John Rigby,
In message <[EMAIL PROTECTED]> you wrote:
> ADS5121 rev4 / MPC5121e rev2 only
>
> Only tested with:
> 2K page size
> 8 bit device width
>
> This controller treats 2K pages as 4 512 byte pages
> and the hw ecc is over the combined 512 byte main
> area and the first 7 bytes of the spare area.
>
> The hw ecc is stored in the last 9 bytes of the
> spare area.
>
> This all means the the spare area can not be written
> separately from the main. This means unmodified JFFS2
> will not work.
Hm... then what exactly is this good for? If we cannot use it with
the normal Linux code I see little use cases for such a driver?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
I've got to get something inside me. Some coffee or something. And
then the world will somehow be better.
- Terry Pratchett, _Men at Arms_
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
