Hi,every one ,i met a question with u-boot 1.1.6 and nand flash K9G8G08UM。
when i do saveenv, it can save into ram,but when i reset ,it resets the default!
following is u-boot information:
U-Boot 1.1.6 (Nov 2 2008 - 10:54:43) for SMDK6400
CPU: [EMAIL PROTECTED]
Fclk = 533MHz, Hclk = 133MHz, Pclk = 66MHz (ASYNC Mode)
Board: SMDK6400
DRAM: 128 MB
Flash: 0 kB
NAND: 1024 MB
*** Warning - bad CRC or NAND, using default environment
"*** Warning - bad CRC or NAND, using default environment"
this is the main question!
i hope i can get someone help,thanks very much!
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
