Hello Benny I have just checkout the build of the ml507_flash and works ok for me
[EMAIL PROTECTED]:~/curro/qtec/u-boot$ ./MAKEALL ml507_flash Configuring for ml507 board... text data bss dec hex filename 202132 10476 30032 242640 3b3d0 ./u-boot I remember that when I was using another toolchain the final link failed (but showing different error). Try with another toochain, I am using one produced by OpenEmbedded, but you will get the same results with the ELDK Best regards On Mon, Nov 3, 2008 at 07:59, Benny Chen <[EMAIL PROTECTED]> wrote: > Hi there, > > I am trying to build a U-Boot image for the ML507 board running from > FLASH and got the "Not enough room for program headers" error. > > > > The main difference for my setup is the toolchain. I am using the > powerpc-eabi-ld linker from Xilinx's EDK tool chain to build the > ml507_flash design for U-Boot. > > > > I have seen a patch on the linker script for the mpc8555cds board and > tried adding the patch to the Xilinx/ppc440-generic/u-boot-rom.lds but > got the "relocation truncated to fit R_PPC_REL24" error. > > Before going further with debugging this problem, I would like to check > if this problem is due to the powerpc-eabi tool chain from Xilinx? > > > > Thanks for your help. > > > > Regards, > > Benny > > > > $ ./MAKEALL ml507_flash > > Configuring for ml507 board... > > powerpc-eabi-ld: u-boot: Not enough room for program headers (allocated > 2, need 5) > > powerpc-eabi-ld: final link failed: Bad value > > make: *** [u-boot] Error 1 > > size: './u-boot': No such file > > > > > > > > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > > -- Ricardo Ribalda http://www.eps.uam.es/~rribalda/ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
