Magnus Lilja wrote: > Hi > > 2008/11/5 John Rigby <[EMAIL PROTECTED]>: > >> Reworked MPC5121 NAND driver. >> Attempted to address all the problems listed by Scott Wood. >> Driver is now board independent. Will still need more >> work to be SOC independent. >> >> Driver for the NAND controller on MPC5121. >> >> This driver has been tested on ADS5121 rev4 / MPC5121e rev2 only >> which has the following configuration: >> 2K page size >> 8 bit device width >> >> This should work on other boards with MPC5121 rev2 silicon with >> little or no change to the driver. >> >> Various vintages of this controller exist on some iMX parts. >> Getting it to work on an iMX with the same controller version >> should be fairly easy. More work if it is an iMX with a different >> version on the controller. >> > > The i.MX31 seems to have NFC v1 while i.MX32 has v2, would that mean > that your driver is likely to work with i.MX32? > I have a hard time keep track of the versions. If the register set has the SPAS register then it is close. > Regards, Magnus > >
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
