Dear Pink Boy, In message <[EMAIL PROTECTED]> you wrote: > > Okay then. I was able to compile u-boot 1.3.4 for the AT91RM9200DK > with changes so that it can handle writing to the flash on my custom > board base don the AT91RM9200EK.
Great. > Seems to work but writes to flash are very slow... You probably did not enable CONFIG_SYS_FLASH_USE_BUFFER_WRITE yet? > However it's a hack of the DK board. I will try over the next week > or two to make a version of the AT91RM9200DK u-boot that uses the > CFI driver. And then submit a patch for that. Thanks in advance. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] "Here's a fish hangs in the net like a poor man's right in the law. 'Twill hardly come out." - Shakespeare, Pericles, Act II, Scene 1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
