This patch extracts the identical config options for the
keymile boards mgcoge, mgsuvd and kmeter1 in a new
common config file keymile-common.h.
Signed-off-by: Heiko Schocher <[EMAIL PROTECTED]>
---
changes since v2
just rebased
include/configs/keymile-common.h | 113 ++++++++++++++++++++++++++++++++++++++
include/configs/kmeter1.h | 81 +--------------------------
include/configs/mgcoge.h | 61 +--------------------
include/configs/mgsuvd.h | 81 +--------------------------
4 files changed, 120 insertions(+), 216 deletions(-)
create mode 100644 include/configs/keymile-common.h
diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h
new file mode 100644
index 0000000..d70bc48
--- /dev/null
+++ b/include/configs/keymile-common.h
@@ -0,0 +1,113 @@
+/*
+ * (C) Copyright 2008
+ * Heiko Schocher, DENX Software Engineering, [EMAIL PROTECTED]
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_KEYMILE_H
+#define __CONFIG_KEYMILE_H
+
+/* Do boardspecific init for all boards */
+#define CONFIG_BOARD_EARLY_INIT_R 1
+
+#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD)
+#define CONFIG_BOOTCOUNT_LIMIT
+#endif
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
+/* should go away, if kmeter I2C support is enabled */
+#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD)
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#endif
+
+#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
+
+#define CONFIG_BOOTCOMMAND "run net_nfs"
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot
Argument Buffer Size */
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history
*/
+
+/* should go away, if kmeter I2C support is enabled */
+#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD)
+#define CONFIG_HUSH_INIT_VAR 1
+#endif
+
+#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */
+#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM
*/
+
+#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address
*/
+
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks
*/
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200,
230400 }
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * How to get access to the slot ID. Put this here to make it easy
+ * to modify in a centralized location. This is used in the HDLC
+ * driver to set the MAC.
+*/
+#define CONFIG_CHECK_ETHERNET_PRESENT 1
+#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE
+#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */
+#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID
bits */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+#endif /* __CONFIG_KEYMILE_H */
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index c345d21..473908a 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -29,6 +29,9 @@
#define CONFIG_MPC8360 1 /* MPC8360 CPU specific */
#define CONFIG_KMETER1 1 /* KMETER1 board specific */
+/* include common defines/options for all Keymile boards */
+#include "keymile-common.h"
+
/*
* System Clock Setup
*/
@@ -60,8 +63,6 @@
#define CONFIG_SYS_SICRH 0x00000006
#define CONFIG_SYS_SICRL 0x00000000
-#define CONFIG_BOARD_EARLY_INIT_R
-
/*
* IMMR new address
*/
@@ -135,13 +136,6 @@
#define CONFIG_SYS_DDR_TIMING_3 0x00000000
/*
- * Memory test
- */
-#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest region */
-#define CONFIG_SYS_MEMTEST_END 0x00F00000
-
-/*
* The reserved memory
*/
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
@@ -249,9 +243,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200,}
-
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
@@ -269,7 +260,6 @@
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
-
/*
* QE UEC ethernet configuration
*/
@@ -310,37 +300,6 @@
#define CONFIG_ENV_SIZE 0x2000
#endif /* CFG_RAMBOOT */
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-/*
- * How to get access to the slot ID. Put this here to make it easy
- * to modify in a centralized location. This is used in the HDLC
- * driver to set the MAC.
-*/
-#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE
-#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */
-#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID
bits */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
#endif
@@ -350,28 +309,6 @@
#undef CONFIG_CMD_LOADS
#endif
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
-
-#define CONFIG_SYS_HZ 1000
-
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
@@ -464,11 +401,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
/*
* Environment Configuration
*/
@@ -478,11 +410,6 @@
#define CONFIG_HAS_ETH0
#endif
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"rootpath=/opt/eldk/ppc_82xx\0" \
@@ -527,6 +454,4 @@
"unlock=yes\0" \
""
-#define CONFIG_BOOTCOMMAND "run net_nfs"
-
#endif /* __CONFIG_H */
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index 31428ea..233bee0 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -35,8 +35,8 @@
#define CONFIG_CPM2 1 /* Has a CPM2 */
-/* Do boardspecific init */
-#define CONFIG_BOARD_EARLY_INIT_R 1
+/* include common defines/options for all Keymile boards */
+#include "keymile-common.h"
/*
* Select serial console configuration
@@ -74,23 +74,6 @@
#define CONFIG_8260_CLKIN 66000000 /* in Hz */
#endif
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_BOOTCOUNT_LIMIT
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
/*
* Default environment settings
*/
@@ -124,36 +107,6 @@
"run ramargs addip; "
\
"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"
\
""
-#define CONFIG_BOOTCOMMAND "run net_nfs"
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#define CONFIG_HUSH_INIT_VAR 1
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of
command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot
Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM
*/
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address
*/
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks
*/
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200,
230400 }
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE 0xFE000000
@@ -400,14 +353,4 @@
#define OF_TBCLK (bd->bi_busfreq / 4)
#define OF_STDOUT_PATH "/soc/cpm/[EMAIL PROTECTED]"
-/*
- * How to get access to the slot ID. Put this here to make it easy
- * to modify in a centralized location. This is used in the HDLC
- * driver to set the MAC.
-*/
-#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE
-#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */
-#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID
bits */
-
-
#endif /* __CONFIG_H */
diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h
index b862130..f53b6d3 100644
--- a/include/configs/mgsuvd.h
+++ b/include/configs/mgsuvd.h
@@ -36,8 +36,8 @@
#define CONFIG_MPC866 1 /* This is a MPC866 CPU */
#define CONFIG_MGSUVD 1 /* ...on a mgsuvd board */
-/* Do boardspecific init */
-#define CONFIG_BOARD_EARLY_INIT_R 1
+/* include common defines/options for all Keymile boards */
+#include "keymile-common.h"
#define CONFIG_8xx_GCLK_FREQ 66000000
@@ -45,22 +45,13 @@
#define CONFIG_SYS_SMC_DPMEM_OFFSET 0x1fc0
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps
*/
-
-#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_SYS_CPM_BOOTCOUNT_ADDR 0x1eb0 /* In case of SMC relocation,
the
* default value is not working */
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-#define CONFIG_BOARD_TYPES 1 /* support board types */
-
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
-#undef CONFIG_BOOTARGS
-
#define CONFIG_EXTRA_ENV_SETTINGS
\
"netdev=eth0\0"
\
"addcons=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0"
\
@@ -88,71 +79,12 @@
"cp.b 200000 f0000000 ${filesize};"
\
"protect on f0000000 +${filesize}\0"
\
""
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change
*/
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
#undef CONFIG_RTC_MPC8xx /* MPC866 does not support RTC */
#define CONFIG_TIMESTAMP /* but print image timestmps
*/
/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory
*/
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt
*/
-
-#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
-#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser
*/
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_HUSH_INIT_VAR 1
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size
*/
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size
*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /*
Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args
*/
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer
Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on
*/
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM
*/
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address
*/
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks
*/
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
* You should know what you are doing if you make changes here.
@@ -211,15 +143,6 @@
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-/*
- * How to get access to the slot ID. Put this here to make it easy
- * to modify in a centralized location. This is used in the HDLC
- * driver to set the MAC.
-*/
-#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE
-#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */
-#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID
bits */
-
/*-----------------------------------------------------------------------
* Cache Configuration
*/
--
1.5.6.1
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
