Dear Wolfgang, > In message pink sez,
>> So still doing some hacking trying to build this and >> wondering if either u-boot-1.3.4 is busted, or the >> instructions are wrong. > > v1.3.4 is old. Why don't you use current code? Far as I can tell v1.3.4 is from Sept this year. Is it older than that? >> Note sure it it works or not. When I run it I get the >> following error. > > > > Cannot parse config file: No such file or directory > > Obviously you have to create a config file in your target > file system... I'm sorry I should have done a little more poking about before I posted that. I put fw_env.config in /etc and changed the entry to and at least /dev/mtd1 0xe000 0x2000 0x2000 #/dev/mtd1 0xe000 0x2000 0x2000 Then created device nodes. mknod /dev/mtd0 c 90 0 mknod /dev/mtd1 c 90 1 After that fw_printenv works. However fw_setenv returns an error. # ./fw_setenv beets are_good Can't open /dev/mtd1: Permission denied Error: can't write fw_env to flash It's probably something stupid on my part. But at least I got this far. Would using the latest tree be better? It appears at least that make at91rm9200dk_config make env doesn't work because fw_printenv needs some kernel headers to build correctly. Mr Foo _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
