Hi, I am using u-boot version 2008.10 + git commit 13d36ec849785453953d00220b2c7dc66644a3c2
The board is a custom MPC8360E, similar to MPC8360EMDS from freescale. My DDR-SDRAM is at address 0x0 - 0x1FFFFFFF I am trying to limit the amount of memory needed to load and boot a linux kernel (2.6.26) to do this I loaded my fdt at address 0x20_0000 and uImage at 0x_30_0000 When I run bootm, I both the kernel and fdt passed their checksum tests, and then I got this error. ERROR: image is not a fdt - must RESET the board to recover. However, if I loaded my fdt at address 0x40_0000 and uImage at 0x50_0000, bootm works fine. Is there a reason why fdt must be loaded at a specific offset from the start of RAM? Thank you for all your time - Richard Retanubun. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
